Tuning Barrel/Caliber Swap on Samyang BigBore? eg: DragonClaw, 909

[CyberDyneSystems]

Does anyone have any experience swapping calibers on the Samyang big bores? I've got a DragonClaw, but ammo is virtually non existent, from air bolts to slugs. They don't like the ".50" that fits the Airforce,. they are really apparently .495 where as most others are .510



Not so for the 909/Light hunter in .45. there is a lot more out there. I've read that the internals are identical, but I can;t seem to find a source for parts, or any example of this having been done.

Thanks in advance.

 

[AncientSword]

Most claws like .498-.500 or so, my accuracy falls way off at .495. 


NSA has their 235 grain in stock, get it in .498 and you’re in business.

I’ve also had good luck with Matt’s Bullets .50 Cowboy bullets in 320 grain but my gun was power tuned.

A true .50 ball will shoot well also and run around 175 grains if I remember correctly. The .495 balls are horribly inaccurate though.

 

[CyberDyneSystems]

Thanks for the heads up on the NSA and other info,. I'll grab some for sure. The stuff I have from Seneca leaves a lot to be desired

 

[gendoc]

mr. hollowpoint makes several .498 slugs for the dragon claw.

i use his 225 & 240gr hp's for my Piatt tuned dragon claw for hunting deer and hogs.

excellent results out to 50yrds which is my max shooting distance with the DC.

 

[Airgunmann]

I had to reach out to pyramid air for a couple parts for my Recluse 357 and they were able to get me transfer port for it when I needed it but it took a bit I emailed them and told them what I needed