250Z in .22 cal
MDT wood AR grip
MDT Grnd-Pod bipod
DFL Shogun moderator (Very Quiet Indoors)
Athlon Ares 2.5-15x50 in ARC mounts
Rogue Air trigger screws with stock spring
(1lbs 5 oz pull)
Reg setting: 2100psi. Got exactly 40 shots before falling off the reg. Factory hammer spring setting.
Pellets:
JSB 25.39 deep & shallow: 870fps (42.7lbs)
JSB 20.83: 935fps (40.5lbs)
25yd 10 shot Groups:
Left - 25.39 Shallow
Right - 25.39 Deep
Center - 20.83. (Two groups. Also first zero shots out of gun, they need a better test now)
The only real gripe is the flimsy chassis. I need to keep the bipod looser so I don’t twist it getting into position.
MDT wood AR grip
MDT Grnd-Pod bipod
DFL Shogun moderator (Very Quiet Indoors)
Athlon Ares 2.5-15x50 in ARC mounts
Rogue Air trigger screws with stock spring
(1lbs 5 oz pull)
Reg setting: 2100psi. Got exactly 40 shots before falling off the reg. Factory hammer spring setting.
Pellets:
JSB 25.39 deep & shallow: 870fps (42.7lbs)
JSB 20.83: 935fps (40.5lbs)
25yd 10 shot Groups:
Left - 25.39 Shallow
Right - 25.39 Deep
Center - 20.83. (Two groups. Also first zero shots out of gun, they need a better test now)
The only real gripe is the flimsy chassis. I need to keep the bipod looser so I don’t twist it getting into position.
Last edited:
