Avenger Arrived

[30harry]

6 inch target overall. I think a rough inch between lines.

That is really great shooting!

I'll be happy if mine is even 1/2 that good.

 

[30harry]

6 inch target overall. I think a rough inch between lines.

OK, for some reason I thought yours was 22 like mine. I see where I missed that it is a 25.

With my 22 I ended up with the reg set at 2,700 and the hammer spring in 3 turns. With that I'm getting right at 900fps.

Tomorrow I'm going to see if I can shoot some 100 yard groups with both the 18.13 and the 25.39 RDs with this setting.

 

[Headshotshorty]

Thanks, for the info! I'm going for a pro tune with a lower extreme spread. It's been raining here the last couple of days. Out the box I'm punching same hole @ 40 yrds.with the Benjamin Domed 27.8 with average of 870 es 12 sd 2 hi 877 low 865 out of 22 shots before the rain started again. I'll just have to wait for the weather to break. 

 

[Hajimoto]

I forgot to mention, Hajimoto is working on baffles for the avenger and soon we can do away with the moderators.

I have completed my Strip Stak Pak for the Avenger but it will not eliminate the need for a moderator/suppressor to achieve ultra-quiet.

Because the free area between the end of the barrel muzzle and the back of the shroud cap is relatively short (3-3/32in/81mm), there is not much room for an Air Stripper and baffle stack to do their job. I have created the most surface area I could to help mitigate sound but still push that the main goal for my Strip Stak Paks is airstream conditioning. I have ALWAYS stated that sound mitigation is an awesome but secondary end result of these assemblies.

 

[30harry]

Can we order it now? 

 

[Hajimoto]

Yep, you can

 

[Hummer57]

Will the Marauder .25 magazines fit the Avenger?

 

[Hummer57]

Will this strip stack pack fit the .25?

 

[gendoc]

Will the Marauder .25 magazines fit the Avenger?



i do know the .22 marauder mags work much better (loading & cycling) than the .22 av mags

 

[Headshotshorty]

I have the 1st gen Marauder and the magazines don't fit. They're about 1/8" too thick. I've heard people are laying them black side down on a level surface on top of 150 grit sandpaper and getting them to work that way. 

 

[NickNorthGA]

I forgot to mention, Hajimoto is working on baffles for the avenger and soon we can do away with the moderators.

I have completed my Strip Stak Pak for the Avenger but it will not eliminate the need for a moderator/suppressor to achieve ultra-quiet.

Because the free area between the end of the barrel muzzle and the back of the shroud cap is relatively short (3-3/32in/81mm), there is not much room for an Air Stripper and baffle stack to do their job. I have created the most surface area I could to help mitigate sound but still push that the main goal for my Strip Stak Paks is airstream conditioning. I have ALWAYS stated that sound mitigation is an awesome but secondary end result of these assemblies.

Yo Haj is it possible to just get the stripper?