Hello all. My Avenger.25 needs a new pellet probe O-ring and I cant seem to find the size or any info as to ordering anywhere. Thanks in advance! Any help is greatly appreciated!
Avenger .25 O-ring question
- Thread starter Carini
- Start date
Upvote 0
Thank you but what search terms would you suggest? I've tried about every combo with no results. Also interesting is they call for the same part number for the 3 barrel o-rings. I've had mine apart and these are much larger that the probe ring iirc.
Upvote 0
Look on page 4 of the linked schematics
Cal 6.35mm O ring φ3*φ1.5 hardness 90°JSR PS-010-X-00
Cal 6.35mm O ring φ3*φ1.5 hardness 90°JSR PS-010-X-00
Upvote 0
It is a Metric 3mm id X 1.5mm cross section 90 hardness o-ring. You can buy them through the o-ring store or from many other online o-ring suppliers.
Upvote 0
I realize O-rings are available online...My question is what is the specific size and maybe you could even post the actual link to the one I need from one of "many online suppliers" for me.
So the inside diameter is 3mm.Ok, The thickness is 1.5. So I need a 6mm OD X 3mm ID. with a 90hardness?
Upvote 0
For metric o-rings the OD is not specified. You only need to supply the ID, cross section, hardness and material to a vendor.
For me to provide a link I have to do the work for you. It is not hard to find one. More satisfaction should come from doing it yourself.
For me to provide a link I have to do the work for you. It is not hard to find one. More satisfaction should come from doing it yourself.
Upvote 0
For metric o-rings the OD is not specified. You only need to supply the ID, cross section, hardness and material to a vendor.
For me to provide a link I have to do the work for you. It is not hard to find one. More satisfaction should come from doing it yourself.
+1. Good learning experience if you are going to use air guns.
Upvote 0
