Avenger 22

[wendell]

I took the Avenger out back today and put the Pro tune on it and that's where I like it for now. JSB 18.13 @ 901 psi, es 14, div4, 15.89@941psi, es10, div2, cros 14.3@970, es9, div2. These are ten shots string from 300 bar fills. Then I put five shots at the chrony just to see what the 25.39 JSB would do, 775 average for five shots, es10,div4 and last as it was getting late in the day five shoots from 21.14 gr H&N baracuda av839, es6 and div2. I'm very pleased at these numbers. My reg pointer on the gage is left of the 2000 psi mark so I assumed it is at around 1800 psi and hammer spring from backed out to 2.75 inward. The shots were going straight and no chipmunk will get by if I do my part. That's it for now !

 

[Phildog59]

Nice this gun just sounds better and better 

 

[wendell]

My Avenger is just like the one Steve got to do his tuning on , except the scope and bipod. I really like my Avenger, just can't get over the fact that the treads on the barrel tube is a little over sized. A little teflon tape works though.

 

[deoogren]

659.84

 

[wendell]

I'm going to be like Steve on this one , yall ain"t getting this one !

 

[Phildog59]

Did you shot for accuracy while testing and how did they group?

 

[Keyman62421]

Any 25 reports???

 

[be4meliz]

Should have some info later today on the .25. Currently set @ 2000reg shooting 26 gr. JSB @ 880. Going to test out several settings + chrony for each + some slugs. Been breezy here in Ma. but accuracy @ 65 was spot on. Might run some out to 100yds after testing & chrony.

 

[wendell]

Grouping at 30 yards is tight even with the cros 14.3g going at such velocities as 

i got. The jsb's are very good the h and n baracuda. I have never had an airgun like this that almost shoot good tight patterns like the Avenger Phildog 59. 

 

[wendell]

 

[wendell]

There's the results of some of the proofs of the pro tune I did yesterday. I put 5-6 shots with various pellets listed with 10 to 20 mph wing gust from my right to left. I filled my rifle yesterday evening before putting it away to 300 bar. Today I shot off three shots without pellets before shooting these groups. I finished with 3000 psi on the gage. All shots done on a rest. Those 25.39 redesigned are something else and all shots at 30 yards . More later!

 

[Phildog59]

Your right those 25.39 look to shoot awesome nice job.

 

[gizmo1974]

nother good thing best fitting has the ldc adapter https://www.bestfittings.co.uk/shop/general-accessories/airgun-silencer-adaptors/smk-alpha-nova-vista-silencer-adaptor/

 

[qball]

Really really impressive!!! This is going to be an epic gun! 

 

[wendell]

I just want to let everyone know that from my previous settings , I turned my hammer spring back from 2.75 to 2 turns and I like the crony numbers better as for as shooting the JSB 18.13 or the FX 18.1grain pellets. I also put in an order for the 177 with a planed arrival date or 10/2020. I love the features of my Avenger. Great little Econo rifle. 

 

[Dingfelder]

I just want to let everyone know that from my previous settings , I turned my hammer spring back from 2.75 to 2 turns and I like the crony numbers better as for as shooting the JSB 18.13 or the FX 18.1grain pellets. I also put in an order for the 177 with a planed arrival date or 10/2020. I love the features of my Avenger. Great little Econo rifle.

I'm very strongly considering getting it in .177 too. Let us know what you think of it! Or anyone else with a .177, please let us know somewhere, even if not here.

 

[wendell]

You will love the adjustability of the hammer and reg on the Avenger for sure. I have the Nova Liberty in 177 and 22 and they are both tack drivers but very little adjusting, so I don't bother. My shooting is mainly 30 to 35 yards anyway. I got a feeling the wood stocks are around the corner though, I'll go for the 25 Avenger. 

 

[Yo]

659.84

Did you win?

 

[wendell]

Just recently I have been dealing with regulator creep on the Avenger 22. PA sent me a Delrin seat to put into the Reg but I took another route in dealing with the creep. Removed the reg after degassing and polished the seat still into the reg and polished it . Took me a couple of times but I was successful. Put it back together and air leaked from the reservoir tubes next to the reg housing. I have a metric Viton o-ring kit that I picked up at Harbor Freight and replaced both tube o-rings with an A112, perfect fit. My rifle is holding pressure on the reg at 1800 psi now for a day with a 3500 psi fill. Everything looking good so far. I used 800 grit wet and dry to polish, followed with 1200 grit.

 

[gunner001]

Wendell do you have a part number for the delrin seat that PA sent you? I have no leaks or issues with my avenger but I’ve read that a lot of people do. This is my first side lever and adjustable regulator air rifle.