Air Venturi Avenge x Regulator issues

[Jay308]

Avenge x is on her way back
And pulled the trigger on a RAW HM 1000X .25 without shroud.

Nice upgrade! It is going to be loud, get a good moderator.

 

[Moonpie]

Nice upgrade! It is going to be loud, get a good moderator.

Any recommendations on a moderator?

 

[Jay308]

Any recommendations on a moderator?

I believe in STO, I have a Falx(moderate core)and it made my Maverick at 50fpe and my Ghost at 68fpe, actually quiet, only hear the hammer hit and the pellet hitting the target. I know having no shroud will not be the same, email them for what they suggest for your no shroud RAW. I have a Donny Sumo and that thing only took the sound to maybe half.

Falx — Silent Thunder Ordnance

The Falx carries a dimensional envelope of 40x170mm, ~180 grams, with a semi-modular serviceable aluminum-tube design. The same proven principles of air stripping, flow delaying, and sound absorption remain but now in an even more advanced form. This brings improved manufacturability, reducing price

www.silentthunderordnance.com

 

[Moonpie]

I believe in STO, I have a Falx(moderate core)and it made my Maverick at 50fpe and my Ghost at 68fpe, actually quiet, only hear the hammer hit and the pellet hitting the target. I know having no shroud will not be the same, email them for what they suggest for your no shroud RAW. I have a Donny Sumo and that thing only took the sound to maybe half.

Falx — Silent Thunder Ordnance

The Falx carries a dimensional envelope of 40x170mm, ~180 grams, with a semi-modular serviceable aluminum-tube design. The same proven principles of air stripping, flow delaying, and sound absorption remain but now in an even more advanced form. This brings improved manufacturability, reducing price

www.silentthunderordnance.com

Sounds good
I appreciate the input.

I also need some input on the best route to deal with under 100 yard shots with the 20 moa rail.
I’m a greenhorn on PCP.
I have the Element Helix 6x24-50 SFP.
Adjustable Rings would be best option to get to 0 moa?

 

[Jay308]

Sounds good
I appreciate the input.

I also need some input on the best route to deal with under 100 yard shots with the 20 moa rail.
I’m a greenhorn on PCP.
I have the Element Helix 6x24-50 SFP.
Adjustable Rings would be best option to get to 0 moa?

You’ll be good zeroing at 20 or 30 yards and using sub tensions for under 20 yards or dial. The 20 moa rail will cause you no issues at all. I would get regular rings, I’m sure you’ll at least need high height. Might have to ask RAW guys about that.

 

[Moonpie]

You’ll be good zeroing at 20 or 30 yards and using sub tensions for under 20 yards or dial. The 20 moa rail will cause you no issues at all. I would get regular rings, I’m sure you’ll at least need high height. Might have to ask RAW guys about that.

Thanks
I’ll check in with them asap.
I have regular high mount see thru rings now.

 

[Rickster]

hey buddy, yes the manual does say the 1/4 turn CCW.. but thats a generalized approximation. Close the reg ALL the way shut after you degas.. Then regas the gun, to 4k+. then SLOOOOOWWWWLY start turning ccw. i'm talking passing a kidney stone slow. And you'll find you can start as low as 1400-1600. This is how i do it. I've had creep, but, i've noticed it's AFTER i've set to a pressure, shot for a while, and change pressures.. Since this last degas, regas, reset. Mines solid at 1800, NO creep over, The AV reg does seem to reset slow, You shoot, it drops, takes about 30secs to truly equalize to set pressure. Try degassing, Go ALL the way Clockwise till you can no more. Regas, Open slower than cool tar flows.

let me also say, it can take a second for the reg pressure reading to catch up to the adjustments youre making, Turn CCW a bit,then stop... wait. it should equalize in a little. once it does, move up from there.

Yes hes actually setting it to 3000 in stead of 2200, hes turning it too far. When ever you get a new part and it does the same thing, that tells you, you are doing the same thing wrong.