Air Venturi Avenge X Leaking after degassing

[Jerkey]

I wanted to lower my regulator pressure so I degassed my Avenge X. I retightened my degassing screw and proceeded to fill my rifle. At around 1900psi I heard my rifle hissing air so I stopped the fill and picked up the rifle to see where the leak was coming from. It seems to be coming from the area where the bottle meets the block. I took the bottle off and applied some silicone to the two white orings on the bottle neck. I then tried to fill the rifle and the same thing happened. Also when I stop filling the rifle the leaking stops. The fill pressure is holding at 2100psi. Any help would be appreciated

Thanks

 

[vettebullet]

Mine did same exact thing...
Replace the 3 o rings on the axle the goes inbetween the two blocks part 80

Also replace the 2 orings on the bottle.

That should fix it