I am using the Arkens scopes and rings in all my rifles except in my first gen Avenger wood stock .22 cal, that use the Hawke shown in the pics. In my opinion this scopes have the best glass of the entire market at a relatively affordable price compared to others high end scopes..
Nice selection of Avenge-X's. In your opinion which stock's are easiest to shoot?I own 4 AVA two .22 and two .25 cal one first gen wood sock .22 and three others second generation Avenge-X one .22 and two .25 cal two wood stock and another synthetic stock all classic with the tube configuration. If you’re looking for the most accurate of all of them go with the .25 cal. I have had tested mostly all the pellets available for them from the lightest 15.89 to the heaviest 33.95 grains. Also if you’re looking for the best moderator for them you can’t go wrong with the Hugget Snipe. Do a search over my user name you would fine a ton of info, good luck. Ps If you decide to buy a .22 cal I strongly suggest to buy the aftermarket maple magazines they are much better than the oem ones..
View attachment 548354
View attachment 548355
View attachment 548356
View attachment 548359
I bought the Donny FL Yokozuna in .30 cal at their recommendation - expensive and a bit heavy but has been very quiet even pushing 70 FP rounds out of the Avenge-X .25 cal - they recommended that you go up one caliber if the barrel is already moderated and the unit won't mount directly to the barrel - has seemed to be good advise so far -After trying several different moderators the one that gave me the best results was the Hugget Snipe. Is the first one from left to right shown in the pic. The others in the same order are the 3D printed Buck-Rail, the DonnyFL Sumo and DonnyFL FX. In this thread you should find all the info you’re looking for…https://www.airgunnation.com/thread...s-the-best-moderator-for-this-airgun.1301128/
View attachment 548611
