Air Venturi Avenge x .25

[Boomer1974]

Can someone tell me where this goes in an Avenge-X .25. Ive looked at the exploded veiws and watched several videos and cant seem to find out. Ive had my rifle tore down fir about 3 months waiting on a part. Im ready to get back to shooting.

 

[charlie99]

Looks like part 32 and 33. That is the poppet inside the valve. Iy should have a small hole and part number 31 goes into it.

 

[rdtricks]

Would like to help but seem unable to open the picture

 

[rdtricks]

What you are holding is the poppet and poppet spring. Attached is the best diagram I have concerning the Avenge-X receiver and O-rings necessary for a rebuild. Look to parts #32 & # 33. You should see how things attach to each other and be able to figure out reassembly. There is a YouTube video but it is not in English:

. Maybe you can turn on subtitles - I just watched with the sound off. I also have another file containing more schematics on my laptop that can be sent later if you need.

 

[Boomer1974]

What you are holding is the poppet and poppet spring. Attached is the best diagram I have concerning the Avenge-X receiver and O-rings necessary for a rebuild. Look to parts #32 & # 33. You should see how things attach to each other and be able to figure out reassembly. There is a YouTube video but it is not in English: [M

DIA=youtube]TqzZhiyjp6c:44[/MEDIA]. Maybe you can turn on subtitles - I just watched with the sound off.

I thought this was that part. I ordered a new one of them.

 

[Boomer1974]

What you are holding is the poppet and poppet spring. Attached is the best diagram I have concerning the Avenge-X receiver and O-rings necessary for a rebuild. Look to parts #32 & # 33. You should see how things attach to each other and be able to figure out reassembly. There is a YouTube video but it is not in English:

. Maybe you can turn on subtitles - I just watched with the sound off. I also have another file containing more schematics on my laptop that can be sent later if you need.

View attachment 586478

The plastic piece im holding in original photo doesn't have a hole for that pin to go in.

 

[rdtricks]

The pin does not go through the plastic piece and only a small hole is utilized to hold the guide pin. Makes me wonder if you got a defective part originally or the piece sheared off somehow. Looking at the Pyramyd Air Air Venturi schematic page for the Avenge-X, I see the entire unit is being sold as a 'kit'. That is a good price as several years ago just the poppet cost me $40 for my Nova Liberty. Hope you are able to get it repaired and shooting soon.

 

[Boomer1974]

The pin does not go through the plastic piece and only a small hole is utilized to hold the guide pin. Makes me wonder if you got a defective part originally or the piece sheared off somehow. Looking at the Pyramyd Air Air Venturi schematic page for the Avenge-X, I see the entire unit is being sold as a 'kit'. That is a good price as several years ago just the poppet cost me $40 for my Nova Liberty. Hope you are able to get it repaired and shooting soon.

Did you see this picture? Thats the old one out of the gun