I have a AV 46m with the red black laminated grips which I just do not like to look at. Will the ones for a IZH 46m fit, I contacted Steve Cochran and he was not sure, and suggested that I ask here.
- The AGN App is ready! Search "Airgun Nation" in your App store. To compliment this new tech we've assigned the "Threads" Feed & "Dark" Mode. To revert back click HERE.
AV 46m grips
- Thread starter jkingrph
- Start date
No one stepping up with help? I would assume they are the same. The Rink site lumps them all together. I could verify that the red/black fits on my Izzy. 
Seriously, if it becomes available drop me a note.
Seriously, if it becomes available drop me a note.Upvote 0
I will try in the next day or so, I am not good at close up photography, hope they will be good, hopefully better than stock photos like on Pyramid Air.
Upvote 0
I popped the grips off my 46m and took some pics so you could have the grip frame measurements. The screw spacing looks different on the 46m grip but the bottom hole is simply holding the two halves of the grip together. Looks like the AV 46m might use both grip frame holes. Hope this helps.
Upvote 0
Yes...the grips for the IZH-46m fit the AV-46m. You can also buy new grips, and a charging handle grip, from Rink. The Rink grips fit all versions, too.
www.formgriffe.de
Baikal IJ46, IZH46, MP46, MP672, AirVenturi 46M | IJ46
Standard grip, according ISSF rules, stippled and oiled, for Baikal IJ46, IZH46, MP46, MP672, AirVenturi 46M. With adjustable palm rest, moveable 5mm up and down from the middle position!
www.formgriffe.de Upvote 0
Those look better than that red black. I ordered the more figured walnut, preferring a natural wood in all of my stocks. In looking at those, would I be safe to assume that instead of both grip screws that fasten to the guns frame trough a metal plate are instead fastened by one screw from each side? I did enter that question in rink's site but they will be closed until Jan 4. and is the charging handle piece included with grips or must it be ordered seperately.
Upvote 0
There is one machine screw on either side, for a total of two. The holes are staggered. The charging handle piece must be ordered seperately.
www.formgriffe.de
Cocking lever grip, Baikal MP46 | Shg-MP46
for Baikal MP46 with 8mm wide cocking lever
www.formgriffe.de Upvote 0