Well I love my Midas Tac so much I just bought a second one. The one huge complaint I have with this scope is no parallax wheel. Not only that but I have no idea why Athlon made the side focus turret so small.
I recently picked up a 3D printer, downloaded Fusion 360 and got to learning. After a pile of failed designs I've finally got it figured out.
3 pc design that is removable and draws together on a tapered keyway and held tight with magnets.
STL files are up on Thingiverse for all to use.
I recently picked up a 3D printer, downloaded Fusion 360 and got to learning. After a pile of failed designs I've finally got it figured out.
3 pc design that is removable and draws together on a tapered keyway and held tight with magnets.
STL files are up on Thingiverse for all to use.
Athlon Midas Tac 6-24x50 Parallax Wheel by srtmat
I designed this wheel to be removable for placing my gun in a hardcase but you could also glue the 3 pcs together. Print the tapered turret cap and ring check to make sure they have a nice fit and sand if necessary. Then you super glue or epoxy the taper ring into the parallax wheel. NOTE: pay...
www.thingiverse.com