Tuning Ataman AP16 tripod mount

[maoboss]

Hi,

I’ve found a picatinny tank mount for my Ataman gun to fix it on a tripod. I was searching for it for a while and try the huggett or the saber but both were too large. This one (innomount) fit perfectly. 

 

[FLgunner]

That looks good, Can you post a link to where you found it? Thanks...

 

[maoboss]

Sure,

ring 
https://www.innogun-shop.de/innomount/aufkippmontagen/double-sight/23-ring-universalschnittstelle/ring-30mm/462/2/3-ring-mit-universalschnittstelle-ring-30mm-ausrichtung-900

Rail 

https://www.innogun-shop.de/fr/innomount/montage-monobloc-fermeture-rapide/montage-pour-point-rouge-sur-corps-de-lunette/adapter-mit-universalschnittstelle/473/adapter-mit-universalschnittstelle-picatinny-10mm?c=28

 

[FLgunner]

Youch! The clamp alone is $95 USD! I think I'll stick with my bag on the bench! My BOG Deathgrip Tripod holds it secure as well. Thanks for the link though, it is a very nice looking part!

 

[AlaskaAirgunner]

I made something similar out of a 30mm rail ring from Amazon. I cut a section out of the middle of it so you just tighten the two side pieces and it clamps on tight. I put some black aircraft tape on the inside of it so it doesn't mar the air tube in any way and it works pretty slick. I can use it at the front for a bipod, or move it to the rear for a tripod mount. I also have a weapon light I can attach to it for some night pesting. 

 

Here is a link to the one I used

https://www.amazon.com/gp/product/B00GH5G78G/ref=ppx_yo_dt_b_asin_title_o03_s00?ie=UTF8&psc=1

 

[zouzou]

Any chance you have experience with adding a bipod mount to the synthetic stock on the M2R ultra compact?

 

[ZeroM]

@AlaskanAirgunner

Nice mod! Thank you for sharing.