This may stir the pot a little for those name brand folks.
I agree, go to Harbor Freight. Buy the Apache 9800. Use the coupon. Then get online and source some closed cell styrofoam. That plug foam is “ok” at best. Does it get the job done? Yes. But, being open cell styrofoam, it WILL absorb ANY moisture in the air or off your equipment. Spend the ~$30 for a dimensional cut piece of CLOSEDCELL foam. There are multiple retailers online.
For those that may have the beliefs of these Hf Apache cases being weaker than the Pelicans...obviously you haven’t had your hands on one. I ran mine over with my 3rd gen 4runner. In the middle and length ways. I didn’t break.
Now...for the finer point. You want a case that will allow for storage of two rifles. I don’t know what you have. I do know what I have. I have a MKii Wildcat .22 I pulled the plugs to accommodate the bullpup W/ bipod and scope attached. And with my configuration, one rifle and a few accessories is all I will be able to put in there.
Yes, there is a lot of room left. But trying to keep balance is a issue also. Lol these cases are HEAVY!
The pad lock tabs are thick and metal “reinforced”. You can’t beat it for the price.
i hope this helps.
edit: I just reread your post, as skinny vertically as the talon and condor are, you should have zero issues getting both into one of these cases. Sorry about that VWbug