Looking at having a custom plenum made for a project for a friend and I , would prefer titanium but aluminum would do, would need port machined in the side vs top.
Thanks in advance
Pic for attention
Thanks in advance
Pic for attention
Anyone know anyone that could machine a small Titanium or Aluminum air plenum for me?
- Thread starter _CTAIRGUNNER_
- Start date
So that would replace the pressure gauge correct?
And you want a port on the side for said gauge?
How many cc are you planning?
And you want a port on the side for said gauge?
How many cc are you planning?
Upvote 0
Is this what you're looking for?
trajectron.com
There's a guy on YouTube that mentions PCP Tunes making one for his Condor so maybe they can work with you.
FX Impact MKI MKII Expansion Power Plenum
FX Impact MKI, MKII Expansion Power Plenum - FX Impact MKI, MKII Expansion Power Plenum has been designed to allow more volume of air behind the valve when the hammer strikes.FX Impact MKI MKII Expansion Power Plenum - FX Impact MKI, MKII Expansion Power
trajectron.com There's a guy on YouTube that mentions PCP Tunes making one for his Condor so maybe they can work with you.
Upvote 0
The rifle this would be going on would need to be mounted parallel with the bottle adapter that will be on the rifle, pressure gauge would be mounted on the adapter, I just need a port on the side in order to run the plenum paralell with the adapter
Upvote 0
Is this what you're looking for?
FX Impact MKI MKII Expansion Power Plenum
FX Impact MKI, MKII Expansion Power Plenum - FX Impact MKI, MKII Expansion Power Plenum has been designed to allow more volume of air behind the valve when the hammer strikes.FX Impact MKI MKII Expansion Power Plenum - FX Impact MKI, MKII Expansion Power
There's a guy on YouTube that mentions PCP Tunes making one for his Condor so maybe they can work with you.
That could very well work as well but would need to make a 90* fitting work somewhere to get it to run parallel,
Upvote 0
1/8" BSP male to 1/8" BSP female
Adaptor 1/8" BSP male to 1/8" BSP female. 300 bar working pressure. (Thread lenght extending adaptor for for example a pressure gauge)
www.huma-air.com
One of these in addition to a right-angle adapter may work.
Upvote 0
Or use a micro-bore hose and clamps to hold the plenum to the tube.
Probably cheaper to buy that Plenum listed above, then just have a 90 degree adapter made.
Probably cheaper to buy that Plenum listed above, then just have a 90 degree adapter made.
Upvote 0
I saw some stainless right angle adapters on Amazon that I'm pretty sure were rated 2600psi. Ofc i can't find them now as im searching.
Upvote 0
Were you able to find what you are looking for? Send me a drawing or sketch and I'll let you know if it's something I can make. It will have to be Aluminum, I don't machine Titanium.
Upvote 0
Also, I have two 54cc PP bottles removed from my MK2 ( the gun is still in parts on the table), if you need spares
Upvote 0