FX Anyone got there FX DRS in yet??

Check out these videos from Sub 12 Airgunners. He explains what is the probable cause of different air leaks.

Ty
But was asking cous dont like long videos. It was valve seal oring as i suspected.. but what a poop rifle to work on.. and bad quality on all parts as fx always.. if want quality buy chinese :D now fighting the valve body back in place,
 
I have 700mm classic, but the barrel is solid. Not heavy superior as mentioned.. why is that ?

IMG-20250906-WA0009.jpeg
 
  • Like
Reactions: coastal drifter
Ok,thanks.. ill try to unscrew it in a while.. just looks like solid metal
pay atention if you remove it as there is a front and rear direction to the liner. One side has a circle a short distance from the end its the breech where the pellet enters the barrel. also just (snug) that piece with the screws when re-assembling it.
 
I think the puff of air is a Oring in the breech end of the barrel transfer port. two Orings inside the brass part of the barrel. The pellet probe is sealed by those Orings when the gun is fired

Problem was missin the smalla 3.5x1mm o-ring in valve body..
After assembly new problem that air is leaking from barrel, so something with valve or valve body, allready tried lapping valve/valvebody.. need to change all o-rings and test.. or then need a new valvebody/valve rod.
 
  • Like
Reactions: coastal drifter
This is my 22 700 (not a)Classic, I have installed a slug power kit, and a match grade trigger, if USPS ever delivers it ! Of course it doesn't have the MDT Elite Chassis, I ditched the plastic stock for a Form Laminated stock.
20250920_150838.jpg


This is my 25 700 Pro
20240915_132209.jpg


IMHO, the DRS is the Perfect air rifle for the way I use an air rifle.
 
Last edited:
This is my 22 700 (not a)Classic, I have installed a slug power kit, and a match grade trigger, if USPS ever delivers it ! Of course it doesn't have the MDT Elite Chassis, I ditched the plastic stock for a Form Laminated stock. View attachment 596462

This is my 25 700 Pro
View attachment 596464

IMHO, the DRS is the Perfect air rifle for the way I use an air rifle.
are they 2 different guns? the laminate looks like a king stock. Both are sweet!
 
Yes, not ideal but I have to commend his persistence.

His wildcat….perfect 👍 now sold
Dream lite…….perfect👍Now sold
Dreamline tactical… leaked after a week refunded 👎
Maverick……..20 shots bang dumped air replaced👎
Replaced maverick……wouldn’t group, barrel liner loose unable to fix refunded👎
Crown…….perfect👍Now sold
Dreamline grs….perfect👍 Lovely looking thing
DRS……….bang dumped air..in for repair.👎

50% success rate😬

Bb
Tough luck, a lot of those are good guns though. I hope he gets a good one.
 
are they 2 different guns? the laminate looks like a king stock. Both are sweet!
Yes, different rifles
The Form DRS stock does look similar to the King stock.
 
  • Like
Reactions: coastal drifter
This is my 22 700 (not a)Classic, I have installed a slug power kit, and a match grade trigger, if USPS ever delivers it ! Of course it doesn't have the MDT Elite Chassis, I ditched the plastic stock for a Form Laminated stock. View attachment 596462

This is my 25 700 Pro
View attachment 596464

IMHO, the DRS is the Perfect air rifle for the way I use an air rifle.

How does that stock feel? Im considering a new stock for my drs.

I got a saber chassis now and dont really like it.
 
How does that stock feel? Im considering a new stock for my drs.

I got a saber chassis now and dont really like it.
The Form fits me really well. I ordered the fully adjustable buttstock, I didn't see the LOP for that was 15" to 16" so I had to remove the recoil pad to get a 14¼" LOP.
20250509_164451.jpg

I also ordered it without the checkering on the grip and forend.
 
Last edited:
The Form fits me really well. I ordered the fully adjustable buttstock, I didn't see the LOP for that was 15" to 16" so I had to remove the recoil pad to get a 14¼" LOP.View attachment 596677
I also ordered it without the checkering on the grip and forend.

Nice looking DRS!


How long did you had to wait for the stock to arrive?
 
  • Like
Reactions: Impact701