Looking for some airgun hunting buddies in the Huntsville, AL area. Send me a DM. Would like to do some squirrel hunting.
Thanks,
AP
Thanks,
AP
Anyone from Huntsville AL?
- Thread starter Airpusher68
- Start date
Saw that you're in Huntsville. I'd PM you, but haven't made any posts on here yet. I recently got into PCPs and just purchased a Kral Puncher Breaker. It was shipped on zero air and I can't complete the first fill using my compressor. AGD suggested I use a bottle to fill the first time, but all I have is a compressor right now. Was wondering if you might have a bottle and would be willing to help me make the in initial fill? I'd be happy to pay you for your trouble. Seems weird to have to ask a stranger, but I really don't know of any air-gunners in town. Thanks, Paul
Upvote 0
have you lubed your fill probe with silicone grease ?
i can see a hand pump giving this problem but not a compressor.
sounds like a poor seating fill probe.
and being it had zero air in it...you might have another problem.
i can see a hand pump giving this problem but not a compressor.
sounds like a poor seating fill probe.
and being it had zero air in it...you might have another problem.
Upvote 0
Apparently a pretty common issue when filling from zero. The valve needs more volume at a faster rate than the compressor can provide to get the valve to seat and seal. The compressor can provide the air pressure, but it's a much lower volume rate.
Upvote 0
yes, I've tried every trick I could find. If I can't get a helping hand from someone local, I'll just invest in a fill bottle. Might need to eventually anyways. Thx
Upvote 0