• The AGN App is ready! Search "Airgun Nation" in your App store. To compliment this new tech we've assigned the "Threads" Feed & "Dark" Mode. To revert back click HERE.

Air Venturi Any recommendations for Air Venturi Avenger Bullpup Upgrades/Accessories for a PCP Newb on a budget

Jump to latest Follow Reply
A

amimemeami

Member
Jan 2, 2024
9
0
Raytown
I just got my first PCP rifle the Avenger Bullpup a week ago, on sale for $299 from Pyramid, and am working on a budget build.

I went with the CVLIFE 6-24x50 for $50- Amazon Link

VEVOR Hand pump for $50 - Amazon Link (Wow so much more force needed to pump than expected. My kid that weighs a little over a hundred can jump and put their full weight on the pump without fully compressing it.) Depressurizing to tune made me sad. Especially when I had to do it a second time. (I have it set to 1800 now). I backed off more than a quarter turn the first time I went to adjust and had the regulator gauge side down when filling, so I did not see what I had done till I had hand filled to 4000 :(....

Looking through the forums I found Buck Rails moderators, I am going to add to my wish list, for down the road. - Buck Rails Link
Any thoughts on Donny FL vs UNI adapter. I have not seen much info about Buck's UNI adapter for the avenger.

I have no experience with Bipods, but from what I have read and watched I see it is highly recommended that you get one for this gun. What features should I be looking at,. Below is my best guess:
Height around 6-9"
Picatinny Rail connection (bottom or side) does mlok work for side rails? One person recommended a bipod with mlok, but I don;t know if they swapped out their rails?
Is the 360 swivel and tilt nice to have or just extra weight?

Recommendations for DIY rear support for precision shooting?

I would love to get the Quick shot upgrade if it is still being made so I can move the lever forward and to the left hand side.. I see one for sale used on this site, but just joined so I can't PM anyone for until I am a member for at least 10 days.

I have seem pictures of Bullpups with a 3d printed support for the rail. Does anyone know if the 3d print file is available or is it custom order only?
Helpful 3D print Files I found while looking:
Magazines - 12 and 20 Round Magazine 3D print files
Moderator - Moderator 3D print files
Gauge Covers - Gauge Cover 3D print Files

Any Recommendations for a cheap case or bag that will fit the rifle with scope? My Plano single Rifle with scope case I have for my Gamo Swarm is too small for bullpup with scope.

Any other must haves? I am trying to keep total buy in under $500 for essentials, with scope and pump and gun I am currently at $420 which is the bare essentials.
 
Last edited:
amimemeami said:
I just got my first PCP rifle the Avenger Bullpup a week ago, on sale for $299 from Pyramid, and am working on a budget build.

I went with the CVLIFE 6-24x50 for $50- Amazon Link

VEVOR Hand pump for $50 - Amazon Link (Wow so much more force needed to pump than expected. My kid that weighs a little over a hundred can jump and put their full weight on the pump without fully compressing it.) Depressurizing to tune made me sad. Especially when I had to do it a second time. (I have it set to 1800 now). I backed off more than a quarter turn the first time I went to adjust and had the regulator gauge side down when filling, so I did not see what I had done till I had hand filled to 4000 :(....

Looking through the forums I found Buck Rails moderators, I am going to add to my wish list, for down the road. - Buck Rails Link
Any thoughts on Donny FL vs UNI adapter. I have not seen much info about Buck's UNI adapter for the avenger.

I have no experience with Bipods, but from what I have read and watched I see it is highly recommended that you get one for this gun. What features should I be looking at,. Below is my best guess:
Height around 6-9"
Picatinny Rail connection (bottom or side) does mlok work for side rails? One person recommended a bipod with mlok, but I don;t know if they swapped out their rails?
Is the 360 swivel and tilt nice to have or just extra weight?

Recommendations for DIY rear support for precision shooting?

I would love to get the Quick shot upgrade if it is still being made so I can move the lever forward and to the left hand side.. I see one for sale used on this site, but just joined so I can't PM anyone for until I am a member for at least 10 days.

I have seem pictures of Bullpups with a 3d printed support for the rail. Does anyone know if the 3d print file is available or is it custom order only?
Helpful 3D print Files I found while looking:
Magazines - 12 and 20 Round Magazine 3D print files
Moderator - Moderator 3D print files
Gauge Covers - Gauge Cover 3D print Files

Any other must haves? I am trying to keep total buy in under $500 for essentials, with scope and pump and gun I am currently at $420 which is the bare essentials.
Click to expand...

amimemeami said:
I just got my first PCP rifle the Avenger Bullpup a week ago, on sale for $299 from Pyramid, and am working on a budget build.

I went with the CVLIFE 6-24x50 for $50- Amazon Link

VEVOR Hand pump for $50 - Amazon Link (Wow so much more force needed to pump than expected. My kid that weighs a little over a hundred can jump and put their full weight on the pump without fully compressing it.) Depressurizing to tune made me sad. Especially when I had to do it a second time. (I have it set to 1800 now). I backed off more than a quarter turn the first time I went to adjust and had the regulator gauge side down when filling, so I did not see what I had done till I had hand filled to 4000 :(....

Looking through the forums I found Buck Rails moderators, I am going to add to my wish list, for down the road. - Buck Rails Link
Any thoughts on Donny FL vs UNI adapter. I have not seen much info about Buck's UNI adapter for the avenger.

I have no experience with Bipods, but from what I have read and watched I see it is highly recommended that you get one for this gun. What features should I be looking at,. Below is my best guess:
Height around 6-9"
Picatinny Rail connection (bottom or side) does mlok work for side rails? One person recommended a bipod with mlok, but I don;t know if they swapped out their rails?
Is the 360 swivel and tilt nice to have or just extra weight?

Recommendations for DIY rear support for precision shooting?

I would love to get the Quick shot upgrade if it is still being made so I can move the lever forward and to the left hand side.. I see one for sale used on this site, but just joined so I can't PM anyone for until I am a member for at least 10 days.

I have seem pictures of Bullpups with a 3d printed support for the rail. Does anyone know if the 3d print file is available or is it custom order only?
Helpful 3D print Files I found while looking:
Magazines - 12 and 20 Round Magazine 3D print files
Moderator - Moderator 3D print files
Gauge Covers - Gauge Cover 3D print Files

Any other must haves? I am trying to keep total buy in under $500 for essentials, with scope and pump and gun I am currently at $420 which is the bare essentials.
Click to expand...
Welcome to the hobby. If you get a compressor in the future, make sure you are able to get parts to rebuild. Tuxing and Yong Heng have many parts available for you to purchase. I bought a Vevor 12V compressor from Amazon im April. It was dead by December and I'm still waiting for them to send me warranty parts. I can't source them myself. It's a total pain.
 
Upvote 0
Wait_what said:
Welcome to the hobby. If you get a compressor in the future, make sure you are able to get parts to rebuild. Tuxing and Yong Heng have many parts available for you to purchase. I bought a Vevor 12V compressor from Amazon im April. It was dead by December and I'm still waiting for them to send me warranty parts. I can't source them myself. It's a total pain.
Click to expand...
Good to know. For now I am keeping to a tight budget, so I will have to rely on elbow grease. I was wondering about the VEVOR compressor. Find any budget compressors that have available parts?
 
Upvote 0
From what I've seen, Tuxing brand and Yong Heng brands have parts everywhere. I hand pumped for several months and it worked. The compressor made shooting WAY MORE FUNNER (I know that's not a word). I'm fairly new to PCPs as well. Just make sure you consider parts availability before you buy. Learn from my mistake when you cross that bridge to compressor world.

In the meantime, happy shooting friend!
 
Upvote 0
Wait_what said:
From what I've seen, Tuxing brand and Yong Heng brands have parts everywhere. I hand pumped for several months and it worked. The compressor made shooting WAY MORE FUNNER (I know that's not a word). I'm fairly new to PCPs as well. Just make sure you consider parts availability before you buy. Learn from my mistake when you cross that bridge to compressor world.

In the meantime, happy shooting friend!
Click to expand...
For future reference
Tuxing
Tuximg compressor amazon link - Tuxing O-Rings Amazon Link - Tuxing Spare Parts Ebay

Yong Heng
Yong Heng Compressor Ebay - Yong Heng Parts Ebay Link - Yong Heng Compressor Amazon Link
 
Last edited:
Upvote 0
Congratulations on joining the world of PCPs, pretty great hobby, IMO. Usually caution new owners not to go too nuts spending on the first, don't want to later regret not saving those limited hobby dollars for an upgrade. Reading your post, think you're OK, along those lines, seem budget savvy. Only stuff I know about the Avenger Bullpup was learned from a video done by member, Casino7095. Not sure he's still with us (serious health issues) but left some great videos on YT. Hope the Avenger works out well for you, Best of Luck, WM
 
  • Like
Reactions: Dogowsky
Upvote 0
amimemeami said:
I just got my first PCP rifle the Avenger Bullpup a week ago, on sale for $299 from Pyramid, and am working on a budget build.

I went with the CVLIFE 6-24x50 for $50- Amazon Link

VEVOR Hand pump for $50 - Amazon Link (Wow so much more force needed to pump than expected. My kid that weighs a little over a hundred can jump and put their full weight on the pump without fully compressing it.) Depressurizing to tune made me sad. Especially when I had to do it a second time. (I have it set to 1800 now). I backed off more than a quarter turn the first time I went to adjust and had the regulator gauge side down when filling, so I did not see what I had done till I had hand filled to 4000 :(....

Looking through the forums I found Buck Rails moderators, I am going to add to my wish list, for down the road. - Buck Rails Link
Any thoughts on Donny FL vs UNI adapter. I have not seen much info about Buck's UNI adapter for the avenger.

I have no experience with Bipods, but from what I have read and watched I see it is highly recommended that you get one for this gun. What features should I be looking at,. Below is my best guess:
Height around 6-9"
Picatinny Rail connection (bottom or side) does mlok work for side rails? One person recommended a bipod with mlok, but I don;t know if they swapped out their rails?
Is the 360 swivel and tilt nice to have or just extra weight?

Recommendations for DIY rear support for precision shooting?

I would love to get the Quick shot upgrade if it is still being made so I can move the lever forward and to the left hand side.. I see one for sale used on this site, but just joined so I can't PM anyone for until I am a member for at least 10 days.

I have seem pictures of Bullpups with a 3d printed support for the rail. Does anyone know if the 3d print file is available or is it custom order only?
Helpful 3D print Files I found while looking:
Magazines - 12 and 20 Round Magazine 3D print files
Moderator - Moderator 3D print files
Gauge Covers - Gauge Cover 3D print Files

Any Recommendations for a cheap case or bag that will fit the rifle with scope? My Plano single Rifle with scope case I have for my Gamo Swarm is too small for bullpup with scope.

Any other must haves? I am trying to keep total buy in under $500 for essentials, with scope and pump and gun I am currently at $420 which is the bare essentials.
Click to expand...
I have a almost brand new buck-rail moderator for sale, send me a pm 😉
 
Upvote 0
amimemeami said:
I just got my first PCP rifle the Avenger Bullpup a week ago, on sale for $299 from Pyramid, and am working on a budget build.

I went with the CVLIFE 6-24x50 for $50- Amazon Link

VEVOR Hand pump for $50 - Amazon Link (Wow so much more force needed to pump than expected. My kid that weighs a little over a hundred can jump and put their full weight on the pump without fully compressing it.) Depressurizing to tune made me sad. Especially when I had to do it a second time. (I have it set to 1800 now). I backed off more than a quarter turn the first time I went to adjust and had the regulator gauge side down when filling, so I did not see what I had done till I had hand filled to 4000 :(....

Looking through the forums I found Buck Rails moderators, I am going to add to my wish list, for down the road. - Buck Rails Link
Any thoughts on Donny FL vs UNI adapter. I have not seen much info about Buck's UNI adapter for the avenger.

I have no experience with Bipods, but from what I have read and watched I see it is highly recommended that you get one for this gun. What features should I be looking at,. Below is my best guess:
Height around 6-9"
Picatinny Rail connection (bottom or side) does mlok work for side rails? One person recommended a bipod with mlok, but I don;t know if they swapped out their rails?
Is the 360 swivel and tilt nice to have or just extra weight?

Recommendations for DIY rear support for precision shooting?

I would love to get the Quick shot upgrade if it is still being made so I can move the lever forward and to the left hand side.. I see one for sale used on this site, but just joined so I can't PM anyone for until I am a member for at least 10 days.

I have seem pictures of Bullpups with a 3d printed support for the rail. Does anyone know if the 3d print file is available or is it custom order only?
Helpful 3D print Files I found while looking:
Magazines - 12 and 20 Round Magazine 3D print files
Moderator - Moderator 3D print files
Gauge Covers - Gauge Cover 3D print Files

Any Recommendations for a cheap case or bag that will fit the rifle with scope? My Plano single Rifle with scope case I have for my Gamo Swarm is too small for bullpup with scope.

Any other must haves? I am trying to keep total buy in under $500 for essentials, with scope and pump and gun I am currently at $420 which is the bare essentials.
Click to expand...
You will hardly find a more affordable air compressor than this one.. 👍😉

IMG_8404.jpeg
 

Attachments

  • IMG_6452.jpeg
    IMG_6452.jpeg
    323.6 KB · Views: 27
  • IMG_6451.png
    IMG_6451.png
    3 MB · Views: 16
Last edited:
Upvote 0
amimemeami said:
Obviously the purpose made version is going to be better, but was the sock good enough for getting started?
Click to expand...
Personally I like sand better than rice, but you need something that is finely woven. I found rice in the sock to be too light and too coarse for a stable rear support. I have a couple old lead shot sacks that I found somewhere and filled them with sand and double-fold zip-tied the end closed. Have been using them for many many years and have won many local matches with their help. Another good bipod for the money is the Caldwell XLA. Kinda expensive when compared to the really cheapy overseas copies you can get now, but still a budget option with far better build quality. I also have a UTG bipod I like that is built really well and is very solid, I think I paid like $90.

utahairguns.com

UTG Heavy Duty Recon 360 Bipod | Utah Airguns

Unique Tension Adjustable 360-degree Panning with Multi-axial Tilting Base to Achieve Virtually Any Desired Bipod Adjustment
utahairguns.com utahairguns.com
 
Upvote 0
Upvote 0
JOSHUA777 said:
havent tryed one yet ,but got great reviews on ebay. great price and many people claim works as good as a high end moderator???
www.ebay.com

Custom Monocore Vented Baffle for Air Venturi Avenger & Umarex Origin Air Rifles | eBay

Air Venturi has recently begun sending out Avengers with a new end cap design that has a very basic stacked washer-style baffle attached. You just want to be using the endcap with this monocore baffle.
www.ebay.com
Click to expand...
That's a great looking option, I had not considered adding internal baffling. I might have to modify some stl files and print me one of those.
 
Upvote 0
You must log in or register to reply here.
Top Bottom
Back
Home
Forums
Resources
Menu