Any low or medium height 34mm adjustable rings out there?

[steve123]

I ordered some adjustable Eagle Vision rings but they are way too high.

Ideally I want low rings to medium rings with a forward bias. Adjustable would be best but if I had 40 moa of angle that would likely work.

Suggestions please?!

 

[kiba]

Burris XTR signature rings maybe? They make a 1.0" high set and you can get up to 40moa out of them with the 20moa inserts.

 

[bigHUN]

Eagle Vision has a decent variety.

Me in example like the medium to high rings, eaglevision adjustable 5mm at front 6mm at rear gives me some MOA, my scope is on 81mm from barrel CL for as very comfortable and natural fit.

 

[bertman77mk2]

Steve, don’t know ring height but Athlon has that canti mount with lots of MOA built in!

 

[Dairyboy]

Burris XTR Signature rings are your best bet.

 

[steve123]

Thanks guys!

bigHUN, I emailed Eagle Vision last week asking questions about alternatives but have not received a reply back. 

Bert, the Athlon 34mm low regular rings would work except no angle and the cantilever's are too high because they are made for AR's.

I had totally forgot about the Burris Sig rings. That might be the way to go.

 

[JungleShooter]

Burris also makes a one-piece quick-detach adjustable mount, the AR-Signature QD P.E.P.R Mount. 



Sportsman also has a 34mm model for elevation adjustment, and one for elevation and windage adjustment.



I like the Burris XTR Signature rings mentioned by others best. If you mount both rings as close as possible to the turrets you get the most elevation cant.

On the Burris page (and in the manual that comes with the rings they have a table to show what elevation cant you get depending on the distance between the two rings). Extrapolating from their table and moving the rings as close as 2" apart I get 56 moa total cant when using the maximum inserts (30mm model).

Matthias