Purchased my first order....says it is reusable; first cleaning worked great; however on my second after soap/water cleaning/air drying, the foam tip tore up...used in the bore of
my Air Venturi Comp10, .177:
my Air Venturi Comp10, .177:
Any experience with Bore-Whips pull-through cleaning #42-0017 for .177?
- Thread starter 1911Tex
- Start date
Patchworm makes a really good 177 kit if you don't like what you are currently using.
myhighpressureair.com
myhighpressureair.com
PatchWorm 177Cal Cleaning Kit
patchworm 177cal cleaining kit, airgun cleaning kit, 177cal cleaning kit
myhighpressureair.com PatchWorm Round Cotton Patches 7/8 500ct
patchworm cleaning patches, 7/8 round patch 500 count in a bag, perfect way to clean your airgun, for sale at High Pressure Pneumatics
myhighpressureair.com Thank you MongooseV8!Patchworm makes a really good 177 kit if you don't like what you are currently using.
PatchWorm 177Cal Cleaning Kit
patchworm 177cal cleaining kit, airgun cleaning kit, 177cal cleaning kit
PatchWorm Round Cotton Patches 7/8 500ct
patchworm cleaning patches, 7/8 round patch 500 count in a bag, perfect way to clean your airgun, for sale at High Pressure Pneumatics
Upvote 0
Both the wife and I have one for competitions in our equipment bags. I even have one at the house for a quick clean......I do change out the cord every year....I don't want one breaking in my barrel and they are cheap.
Tony P.
Tony P.
Upvote 0
These are for lubing I believe. Check out Airgun Channel Nate shows that he uses Ballistol with gun upside down , and uses a pull through. Like above. Patch Worm.
Upvote 0
this is only cleaning patch i use . no brushes or solutions . a drop of oil and let sit for a few .Patchworm makes a really good 177 kit if you don't like what you are currently using.
PatchWorm 177Cal Cleaning Kit
patchworm 177cal cleaining kit, airgun cleaning kit, 177cal cleaning kit
PatchWorm Round Cotton Patches 7/8 500ct
patchworm cleaning patches, 7/8 round patch 500 count in a bag, perfect way to clean your airgun, for sale at High Pressure Pneumatics
Upvote 0
What everyone else has recommended is great and I use them as well! But I just order this a week or so ago and it is fantastic! It is brushless and it pulls all the gunk out of your barrel usually in 1 pull. I did have to cut half of the brass weight so that it would fit in the breech of my guns though. Other than that it works fantastic!
Upvote 0
I had several British pull through's back in the day , but for for my .308 FAL with a Coonan rec I might ad I used a bore snake.
.Upvote 0
I use grass trimmer line in the green colour for .177 . Cut to right length, heat up one end with a lighter and flatten it out. Cut the opposite end to a point and use cotton patches. Cheap and very effective.
Upvote 0
Ahhh a DIY Patchworm the main reason i use it is no metal parts and ALWAYS ONLY clean from breach to the muzzle .
Upvote 0
I have a few bore snakes also, and I bought the ones without the brass in them for the PCP's. That way I don't have to change the breach O rings after pulling them through.
Tony P.
Upvote 0
I've been using 80 pound catfish line for over 40 years. I tie a small loop in one end to slip a patch through and the other end has some lead wire with shrink tubing covering it. I've never wore one out.
Upvote 0
