Anschutz 2002 problem

[Joe Attard]

I have a problem with the valve block in my older version Anschutz air rifle, side lever cocking .177 cal.
Is anyone here familiar with this or has encountered this problem before?Parts are no longer available from manufacturer.TIA.
The part I'm referring to is no57 in the pics.

 

[marflow 777]

you mean this parts
if it is email Enrico the payment will be a transfer and the shipping will be painful but at least you will not have a wall hanger of course if you had a friend in Germany it might be easier
https://www.waffencenter-gotha.de/s...UeTZ-2002-Pressluft-Compressed-Air::5726.html
i would call here
http://www.iss-internationalshootersservice.com/

 

[Joe Attard]

you mean this parts
if it is email Enrico the payment will be a transfer and the shipping will be painful but at least you will not have a wall hanger of course if you had a friend in Germany it might be easier
https://www.waffencenter-gotha.de/s...UeTZ-2002-Pressluft-Compressed-Air::5726.html
i would call here
http://www.iss-internationalshootersservice.com/

Thank you ,but the Anschutz I have is not a compressed air model.It has a side lever.This valve is for the compressed air type.

 

[marflow 777]

the problem is you showed the compressed air parts diagram and the parts you show are not for that rifle
the SSP rifle shows up as a 2001 on the Anshutz parts diagram site so we can help you if the info is wrong
https://www.anschuetz-sport.com/en/downloads/ersatzteillisten/
okay it is at the bottom of the list out of order
now you can find the parts you need

 

[atombomb]

you mean this parts
if it is email Enrico the payment will be a transfer and the shipping will be painful but at least you will not have a wall hanger of course if you had a friend in Germany it might be easier
https://www.waffencenter-gotha.de/s...UeTZ-2002-Pressluft-Compressed-Air::5726.html
i would call here
http://www.iss-internationalshootersservice.com/

I have a friend stationed at Ramstein AFB in Germany. I also need a new power valve for my SuperAir2002 SSP and was wondering where he might be able to find me one over there?

 

[Joe Attard]

I have a friend stationed at Ramstein AFB in Germany. I also need a new power valve for my SuperAir2002 SSP and was wondering where he might be able to find me one over there?

Are you referring to an Anschutz 2002?

 

[atombomb]

Are you referring to an Anschutz 2002?

Yes

 

[Joe Attard]

Is it pre-charged or side lever?

 

[dgeesaman]

If it’s the precharged version then Anschutz stopped providing the part years ago and the polymer valve seat has probably crumbled. I have a modified version of the 2002 CA and Allen Zasadny retrofitted a valve from a Steyr. I do not know if he will do that for any 2002CA.

 

[Joe Attard]

If it’s the precharged version then Anschutz stopped providing the part years ago and the polymer valve seat has probably crumbled. I have a modified version of the 2002 CA and Allen Zasadny retrofitted a valve from a Steyr. I do not know if he will do that for any 2002CA.

Good to know.

 

[atombomb]

Is it pre-charged or side lever?

side lever

 

[Alejandro91]

I add the new 2002 valve to my side lever anschutz and added a pen spring to one side just cut it allitl for it to make compression for vavle to close and works fine but i know on anytime spring will damage and need to get a new spring. old anscutz valves are impossible to find

 

[Joe Attard]

How about the seals,especially the big one of the plunger?Do you still get them?

 

[Joe Attard]

Looking for seal part no 8 in diagram.Is it still available anywhere?Thanks all.

 

[Alejandro91]

I have a problem with the valve block in my older version Anschutz air rifle, side lever cocking .177 cal.
Is anyone here familiar with this or has encountered this problem before?Parts are no longer available from manufacturer.TIA.
The part I'm referring to is no57 in the pics.

View attachment 537083

View attachment 537094

 

[Alejandro91]

I have a problem with the valve block in my older version Anschutz air rifle, side lever cocking .177 cal.
Is anyone here familiar with this or has encountered this problem before?Parts are no longer available from manufacturer.TIA.
The part I'm referring to is no57 in the pics.

View attachment 537083

View attachment 537094

I have the solution, that valve is old you need new valve and do some mods, but it's easy....send me dm

 

[Joe Attard]

I have the solution, that valve is old you need new valve and do some mods, but it's easy....send me dm

What do you need to know?

 

[Alejandro91]

you where asking how to repair???

 

[Joe Attard]

So you have a solution to repair or modify this valve?

 

[Alejandro91]

I bought the new new valve that has no spring, cause original old.valve as what I have tried and researched is hard to repair..... I new valve block and valve and had to find a spring that has good width to sit on valve and block (6.9mm-7.2mm) cut it down so that it can open and shut down valve to the correct fps which was about (6.5mm length), If you send me pm I can do a video for you so you can see exactly what I did.