Another fun target

[Mr.Brocock]

I didn't want to step on another thread, so... this is what i use my old dull table saw blades for.
Draw what ever animal you like, plasma cut the shape and weld to a 2 foot section of re-bar.
Then i use the cut-off piece to weld together as a "far target". I put it on a 15 foot tall pole.
I will fill in the middle.......
These are all set at random distances for target shooting with my slingshot!! This time of year I
am practicing for the East Coast Slingshot Championships. Then they become my Pellet gun
targets the rest of the year!!

 

[Kgphotos]

Do they still ring like a sawblade after you weld them in place like that?

 

[Mr.Brocock]

If you hit them in the right spot. Not on the post.

 

[steve123]

What ammo do you use for your slingshot, and which slingshot is it?

 

[Mr.Brocock]

My current setup is a SimpleShot LT2 and 1/4" ball bearings. I shoot real light bands, .4 Omega
Yellow, 10 x 15 taper, 305mm long. That is my inside knock down target set up. For the 25 yard target, i use Omega .45 white, same taper and length. I have been use the inside set up on steel outside targets,
but I'm still debating....

 

[steve123]

My current setup is a SimpleShot LT2 and 1/4" ball bearings. I shoot real light bands, .4 Omega
Yellow, 10 x 15 taper, 305mm long. That is my inside knock down target set up. For the 25 yard target, i use Omega .45 white, same taper and length. I have been use the inside set up on steel outside targets,
but I'm still debating....

Thanks for the info.

Wow $20 per 1000, that's cheap!

Man wear eye protection because I bet those things bounce off steel like crazy.

Part of me wants to get good with a slingshot.

 

[Mr.Brocock]

I buy 5000 at a time. I've tried 3/8" , 5/16", but i like 1/4". I don't kill with it ,I just shoot at targets!!
This is my inside knock down target set up. I shoot from 10 meters, so i just pull the string to reset.