Now that Annihilator Airguns and Tuning has closed, where would one go to have their KRAL mods done? Thank you
Annihilator Airguns and Tuning
- Thread starter thetoyman
- Start date
What do you want to have done to your gun? Troy put up a series of videos that shows a lot of what does.
Upvote 0
Try still offers the quiet mod. It works very well.
Have you shot the gun yet? My gun is more accurate than I am. The trigger is easy to adjust and that helps with shot to shot consistentcy.
What gun?
What Cal?
What scope?
What is your shot count now and what is your group size now.?
Have you scrubbed the barrel until it shines? Is your stock tight on the action?
Have you shot the gun yet? My gun is more accurate than I am. The trigger is easy to adjust and that helps with shot to shot consistentcy.
What gun?
What Cal?
What scope?
What is your shot count now and what is your group size now.?
Have you scrubbed the barrel until it shines? Is your stock tight on the action?
Upvote 0
Everything on Troy's site is out of stock! Has been for months. He does not answer the phone & no returned calls. I have read the same issue by many others on other sites. It is a dead site.
Upvote 0
I'm in the process of adding a regulator to my Kral puncher breaker, tracking says it will be here 12/31... First step is ordering the regulator. I ordered a Huma from here. It takes about 2 weeks coming from the Netherlands .
https://www.huma-air.com/Kral-Arms-Puncher-Breaker-regulator
Next use the oring list below and order all the orings needed. I use the oringstore.
https://www.theoringstore.com/store/
Then watch Troy's disassembly video and follow the instructions, going as far as removing the valve.
https://youtu.be/5s-0c50sn5E
Follow the instructions for installing regulator, then put your gun back together making sure to use a good silicone grease for the orings.
If your gun has never been disassembled you may need a heat gun for the threadlock Kral uses on the air cylinder.
Upvote 0
Thank you for the info! Please let me know how it turned out. Do you know of anyone who offers something similar to Troy's quiet kit? Thanks again
Upvote 0
I just had a gun tuned by Troy not to long ago! He's had some personal stuff going on in his life. To my knowledge he's still tuning, but he's going to change his policy and only sell tuned guns. Be patient, even more now with everything going on. The Kral tune he did for me rocks! He knows what he's doing. I'll buy another gun from him even if it takes time to get it, it's worth the wait!
Upvote 0