Today I finally tested my RAW HM1000X .25 with 34gr JSB at around 905 fps.
This is the first time I tested the complete string after I installed FX Royal style valve and less than half the hammer weight.
The results are surprising for me. I was never expecting it.
When I had installed plenum, peek valve and ssg, I had started getting 70 good shots with 34 grain pellets at 900fps.
In stock condition out of the box the gun used to give around 50 shots at same power level
But now after opening the stem of valve in atmosphere like fx Royal series that dictated me to reduce the hammer weight I have successfully obtained 115 usable shots.
Details are as below:
Starting pressure 250 bars
Ending pressure 120 bars
Air utilised 130 bars
Pellet weight 33.95 grain
Caliber .25
Average Speed 905 fps
Spread 20 fps
Total shots 115
Reg pressure 145 bars
Average power per shot 61.72 ftlb
Cylinder capacity 480cc
Efficiency 8.97
To me this is amazing
https://youtu.be/KfWUdhTjxLk
This is the first time I tested the complete string after I installed FX Royal style valve and less than half the hammer weight.
The results are surprising for me. I was never expecting it.
When I had installed plenum, peek valve and ssg, I had started getting 70 good shots with 34 grain pellets at 900fps.
In stock condition out of the box the gun used to give around 50 shots at same power level
But now after opening the stem of valve in atmosphere like fx Royal series that dictated me to reduce the hammer weight I have successfully obtained 115 usable shots.
Details are as below:
Starting pressure 250 bars
Ending pressure 120 bars
Air utilised 130 bars
Pellet weight 33.95 grain
Caliber .25
Average Speed 905 fps
Spread 20 fps
Total shots 115
Reg pressure 145 bars
Average power per shot 61.72 ftlb
Cylinder capacity 480cc
Efficiency 8.97
To me this is amazing
https://youtu.be/KfWUdhTjxLk