- The AGN App is ready! Search "Airgun Nation" in your App store. To compliment this new tech we've assigned the "Threads" Feed & "Dark" Mode. To revert back click HERE.
AlumiRod - more shots and a HUGE weight savings!
- Thread starter Doug-T
- Start date
Last night I Cerakoted the aluminum air reservoir and used Turtle Wax to coat the inside of the tube to keep it from oxidizing. I put it all together last night, pumped it up to 3kpsi and it has a slow leak. Time to test where the leak is then finish the nylon hammer, captured hammer spring and enlarged porting. Fully assembled it's 1.5# lighter than a Gen 1 Mrod.
The jig to hold the reservoir while I Cerakoted it and to hold it inside the oven so it doesn't touch the inside walls. A VERY tight fit, maybe 1/4" away.
![MuD8HsO.jpg](http://[url="https://i.imgur.com/MuD8HsO.jpg"][img]https://i.imgur.com/MuD8HsO.jpg)
[/url][/img]
Here's the steel air reservoir next to the aluminum one.
![s7qmGZf.jpg](http://[url="https://i.imgur.com/s7qmGZf.jpg"][img]https://i.imgur.com/s7qmGZf.jpg)
[/url][/img]
The jig to hold the reservoir while I Cerakoted it and to hold it inside the oven so it doesn't touch the inside walls. A VERY tight fit, maybe 1/4" away.
Here's the steel air reservoir next to the aluminum one.
Upvote 0
Yes, very nice work! 
I used a wooden dowel rod on the steel air tube, like a corn cob holder, for blueing, and had the same fitment issue in the oven.
I used a wooden dowel rod on the steel air tube, like a corn cob holder, for blueing, and had the same fitment issue in the oven.
Upvote 0