Altaros M-24 air rifle

1575485103_13245375995de7feaf50f502.71897724_bullets.jpg


He's been making pretty regular updates over on GTA, the last update was 11/26 where he posted quite a bit of information. It's pretty good read anyone interested pm me and I'll send you a link to the 11 page thread where he goes into detail about this project from the prototype to their M24 and their bullets they make for them.

Come on don't these 31gr .22 slugs look bad assed😎


 
200 moa? Even my fx impact couldn't do that. 100 moa is possible but idk about 200 moa. They claim to hit their target at 600 yards. I bet their target is elephant size. Lmao.

It's not always about what a FX can or can not do.

I'd link the thread directly but every time I post links to other forums I get a PM asking me not to do it, so I don't.


 
If i remember right those slugs in the picture are 105gr not 32gr. This gun really interests me. If in can even do half of what they are claiming they will still have a great gun.


Inside the thread on GTA he weighs one in a video, 31gr exactly.


Ok i didn't see that, my mistake. I just don't know how those can weigh 32 gr. They look way to long to weigh that little.
 
Those are not 31gr bullets if I remember right they were closer to 60grains and he was also able to push them only 720fps also he have said that those are just experimental ones and stock M24 wont be using them since that bullet requires alot faster twist rate and also that speed is way way way too slow atm unreal how much false statements go around.
 
Those are not 31gr bullets if I remember right they were closer to 60grains and he was also able to push them only 720fps also he have said that those are just experimental ones and stock M24 wont be using them since that bullet requires alot faster twist rate and also that speed is way way way too slow atm unreal how much false statements go around.

I do stand corrected, they are 60gr not 31, that's what happens when you post as you're walking out the door.

Not so much a false statement just a honest mistake on my part.