Are any of you Leshiy 2 shooters using the new Alpha trigger? I'm wondering what yall think. Not much discussion from users that I can see.
EDgun Alpha trigger?
- Thread starter Joes41
- Start date
After looking into with curiosity, was not worth the costs etc to the current setup. No gain for what I do ... around 30 yards. Those going for 50 + might want any perk or edge to help, but then I'd be looking at a different platform IMHO.
Upvote 0
My L2 with FX liners is sub MOA @ 50 Meters, but to get there it was a learning curve with trigger control.
.............
If you got a money to burn, you can get a $75K BMW or Audi for example and still going for another $30K performance upgrades.
Nothing is wrong with L2 existing OEM trigger, pretty much the same idea as the FX upgrade parts.
Upgrades and updates always makes us happier
.............
If you got a money to burn, you can get a $75K BMW or Audi for example and still going for another $30K performance upgrades.
Nothing is wrong with L2 existing OEM trigger, pretty much the same idea as the FX upgrade parts.
Upgrades and updates always makes us happier
Upvote 0
I've had my Leshiy 2 since September 2021. Just when I thought that I've gotten use to the trigger pull, hiss goes the valve.
Yes, the Alpha Trigger is a bit pricey, but it's worth it to me getting rid of the trigger pull hiss!
Just received and installed the Alpha Trigger today. Installation was very straight forward, although slightly different for my install due to the Huma-Air Full Aluminum Firing Mechanism that I have installed on my Leshiy 2.
After installing and test firing, it initially failed to fire and would just bleed the valve when I pulled the trigger.
The solution was to adjust the Valve Stop set screw and now the trigger pull fires correctly.
Note that as seen in the far right photo, the safety switch does move further than the Fire indent.
I assume this is due the build of the Huma-Air Full Aluminum Firing Mechanism vs the stock Polymer Firing Mechanism.
The extended forward position of the safety switch in the Fire position does not adversely affect the trigger.
Yes, the Alpha Trigger is a bit pricey, but it's worth it to me getting rid of the trigger pull hiss!
Just received and installed the Alpha Trigger today. Installation was very straight forward, although slightly different for my install due to the Huma-Air Full Aluminum Firing Mechanism that I have installed on my Leshiy 2.
After installing and test firing, it initially failed to fire and would just bleed the valve when I pulled the trigger.
The solution was to adjust the Valve Stop set screw and now the trigger pull fires correctly.
Note that as seen in the far right photo, the safety switch does move further than the Fire indent.
I assume this is due the build of the Huma-Air Full Aluminum Firing Mechanism vs the stock Polymer Firing Mechanism.
The extended forward position of the safety switch in the Fire position does not adversely affect the trigger.
Upvote 0
So you still had issues with the valve hiss after proper trigger operation on the L2? Not sure if the proper term is "flick" the trigger, but I believe that new trigger simply takes care of the flick responsibility for a lot of $. Least that is what I got out of the EGW install video. Nice Huma lower there!I've had my Leshiy 2 since September 2021. Just when I thought that I've gotten use to the trigger pull, hiss goes the valve.
Yes, the Alpha Trigger is a bit pricey, but it's worth it to me getting rid of the trigger pull hiss!
Just received and installed the Alpha Trigger today. Installation was very straight forward, although slightly different for my install due to the Huma-Air Full Aluminum Firing Mechanism that I have installed on my Leshiy 2.
After installing and test firing, it initially failed to fire and would just bleed the valve when I pulled the trigger.
The solution was to adjust the Valve Stop set screw and now the trigger pull fires correctly.
Note that as seen in the far right photo, the safety switch does move further than the Fire indent.
I assume this is due the build of the Huma-Air Full Aluminum Firing Mechanism vs the stock Polymer Firing Mechanism.
The extended forward position of the safety switch in the Fire position does not adversely affect the trigger.
View attachment 592419
Upvote 0
Correct, a lot of money to get rid of the “trigger flick” technique, to get a normal trigger pull action.
Upvote 0
It also has a second adjustment position that allows "(Fast Reset Mode)". Supposedly gives the ability for faster follow-ups, with a cleaner break.
Upvote 0