• The AGN App is ready! Search "Airgun Nation" in your App store. To compliment this new tech we've assigned the "Threads" Feed & "Dark" Mode. To revert back click HERE.

Alpha Carette

I've had good luck with mine so far, have a PMV valve and Joe bs filter it chugs along slowly filling without much heat untill it reaches 4200psi then it starts to build heat from there up. I run a floor fan in addition over the cylinders and only gets to hot to the cylinders to hold my hand on that last 300psi, I dump the pressure leaving it running till it cools down, then top off.

I don't just shut it down then I dump bleed the pressure while it's running for ten minutes as this clears any moisture from the cylinders.

I broke mine in with no pressure and changing the oil at around 30 mins then one hour, and repeated using Bauer synthetic oil...I bought a gallon to have plenty plus was much cheaper.

Don