Anyone have a Allen Z fill adapter for a theoben the can send me some pictures of how it is set up. The one I made is having some issues.
Allen Z fill adapter
- Thread starter shayes22
- Start date
It is a Parker H1-63 hydraulic connector. You can get them from Amazon l, not sure about quality, granger etc. Just order new ones, they are cheap.
I have an AirVenturi quick connect on mine.
I have an AirVenturi quick connect on mine.
Upvote 0
Which part are you asking about? The male portion on the gun or the female that goes on the fill hose?
Do you have a picture of your setup?
Do you have a picture of your setup?
Upvote 0
Check with JoeB...https://www.topgun-airguns.com/
He used to sell them....
or Just Contact Allen Zasadny.....
Also search for Parker QF series 63...
Also Early AirArms fill adapter(before the T-Bar)
Good Luck,
He used to sell them....
or Just Contact Allen Zasadny.....
Also search for Parker QF series 63...
Also Early AirArms fill adapter(before the T-Bar)
Good Luck,
Upvote 0
If you have a company in your area that makes hydraulic lines they will most likely sell them. I would just take my gun and hose with you. Measure twice cut once sort o thang.
Upvote 0
Have bought them at fleet farm, tractor supply and other implementation stores. Take the fitting in, or the rifle, and do some testing.
Took one of mine in and let them know what I was doing. After showing them the rifle in the case they were fine. You could also remove the bottle if you can and take that in to test.
Took one of mine in and let them know what I was doing. After showing them the rifle in the case they were fine. You could also remove the bottle if you can and take that in to test.
Upvote 0