Recently I had to remove my barrel on my Kratos to remove a stuck pellet and I noticed that the barrel seals are chewed up. Crosman still doesn't have any part number listings for the Craftsman line, so no help there. If it makes a difference, I have the .22cal. Any help will be welcome.
Tuning Akela, Cayden or Kratos - What is the barrel seal/o-ring size?
- Thread starter strangeluck65
- Start date
I have the part number and size at home and can let you know this evening after I get home from work if you haven’t gotten an answer before then.
Upvote 0
Here is the info you needed:
Description:Barrel outer diameter o-ring. Part number: CR-046
11mm across
1.5 mm thick
Description:Barrel outer diameter o-ring. Part number: CR-046
11mm across
1.5 mm thick
Upvote 0
I recommend using a liberal amount of silicone grease when putting the Kratos barrel back in, it takes a bit of twisting and pressure to pop it in its spot and if the o ring isn’t lubed it will tear or shear it.
Upvote 0
That's the same size as my FX Boss .30cal, I just ordered an o-ring assortment from Amazon earlier today and it has 100 of that size. Thanks for the info!
Upvote 0
Here is some info i just received from Crosmajn support. Help it helps.
Upvote 0
I bought a box of metric size O rings from Harbor Freight. I bet they would have a matching O ring to fit.
Upvote 0