Airforce Air rifles

[BullDawson]

Anyone know of an easy way to empty an air tank on one of these guns >?

 

[X-Wrestler]

Take the tank off and press the valve down.

 

[Enkey]

Hi

With a carpenter's clamp and some wooden boards so as not to damage the metal, if you empty it too quickly the stem will freeze and you can bend it

Regards 

Enkey 

 

[beerthief]

AirTanksForSale / Topgun-Airguns has a tool made for this operation $70 i think i remember and a video on line about it 

(corrected SP) https://www.youtube.com/watch?v=EoaowenCyLo

 

[rkmcvey]

I dry fire my SS down to 800-900 psi or so, then place a 5/8 in. washer with a 1/4 in. hole over top hat and gently pull back on the cocking handle to SLOWLY release air. As the psi drops less pressure is needed to release air. Usually takes a minute or two. Just take your time.

 

[mtndragon]

I slowly unscrew the pressure gauge on the tank until it starts to hiss.

 

[mercado]

Send me your address I ship you one..when you receive it put 2 cents in and screw it slowly..it will degas the bottle in a slowly rate..

 

[Guest]

I slowly unscrew the pressure gauge on the tank until it starts to hiss.

Allen head on the side that retain the burst disk. As mentioned, loosen & let it slowly depressurize.

 

[BullDawson]

Thank you all for your help. sucks being a rookie.

 

[BullDawson]

 

thank you