took 4 inchs off main air tube took out baffles but used muzzel break factory took 3.5 off shroude 
aircuda max carbean
- Thread starter gizmo1974
- Start date
If you MUST have a shorter "Rifle" and can't or don't want a Bull Pup that is a nice mod to make.
Well done
Well done
Upvote 0
thanks all i did on this one was took the factory baffles out took off 3.5 inchs from shroude its still got factory muzzel dreak on in side left barrle alone barrle still stock length i did not wount to re crown or cut down barrle then i had a machine shop guy re do the air tube took off 4 inchs of it i not shot it yet since the cut down but before with sumo and factory baffles mouse fart quiet
Upvote 0
With 4 inches of the tube gone your shot count must be down to only one mag. I cut down a few tubes over the years but usually with at least a 250-300b fill pressure rating and definitely no big plenums. What is your shot count now with the gun still at stock power levels?
Upvote 0
Hey gizmo1974 !
I realize this is 9 month old thread, but Im curious on your thoughts, after you converted your Aircuda Max, to a carbine.
A report back on shot count, loudness, and most importantly accuracy, would be greatly appriciated!
I love the look of what youve done here!
Thanks in advance.
I realize this is 9 month old thread, but Im curious on your thoughts, after you converted your Aircuda Max, to a carbine.
A report back on shot count, loudness, and most importantly accuracy, would be greatly appriciated!
I love the look of what youve done here!
Thanks in advance.
Upvote 0
it worked fine my brother shot it and it grouped good i did not cut any length off the barrle just took off 4 inchs of air tube then removed baffles and took 3.5 off shroude put all back together shot fine i let feller out west have it he shot it loves how it shooting
Upvote 0