Went to fill it up today. Noticed a leak from the lower tube at the “cap”. Not sure if the cap is loose or if it is a fixed part of the gun. Any ideas would be great.
- The AGN App is ready! Search "Airgun Nation" in your App store. To compliment this new tech we've assigned the "Threads" Feed & "Dark" Mode. To revert back click HERE.
Tuning Air Venturi avenger lower tube leak
- Thread starter got2fishsd
- Start date
You'll need to evacuate all the pressure from the gun before you can remove the cap. Once the load is off the threads, it will be much easier to remove. But more importantly, safe to remove.
Upvote 0
That’s the easy part. I actually have 2 leaks from the lower tube. Hoping some new o rings will fix it.
Anyone know where to get the correct O rings?
Upvote 0
For small quantities of O-rings, most people appear to use theoringstore, present company included.
Here's the exploded drawings in case you didn't have it already.
Here's the exploded drawings in case you didn't have it already.
Upvote 0
I did not have that. Thank you very much!For small quantities of O-rings, most people appear to use theoringstore, present company included.
Here's the exploded drawings in case you didn't have it already.
Upvote 0
I have the same problem. The cap is super tight. Did you have to use heat to get the cap off? Was Loctite used when the factory assembled the gun?
Upvote 0