Air Venturi 88 cu in tank leaks.

[wbarrett58]

My Air Venturi 88 cu in tank leaks at the vent knob when I top off my rifle. Can I obtain a seal to fix this? A schematic also would be great. Or do I have to send it in to be repaired. 

 

[Centercut]

Lets see a photo of the tank valve and where it leaks...? Thanks.!

 

[Coldair]

Are you tightening it all the way tight enough? Are you sure it is at the knob and not the threaded connection to the hose?



CA

 

[starlingassn]

Are you tightening it all the way tight enough? Are you sure it is at the knob and not the threaded connection to the hose?



CA





that was what i was going to ask also lol

 

[Bob_O]

The Omega I have had a slow leak at the pressure gauge....you could hear it only when it was right up at your ear. Soapy solution verified the leak was at the gauge. A 1/16 turn of a wrench was enough to stop it and it hasn't leaked since.

 

[Guest]

The knob is held on with a brass screw...tighten the screw..

 

[wbarrett58]

It seems to be leaking under the cylinder marked “do not remove “. 

 

[Coldair]

Can you post a picture with an arrow pointing to exactly where the air is hissing from?

CA

 

[wbarrett58]

Got it! I thought I was going to strip it due to the torque I applied , but it finally gave. Buggered thread? I don’t know but no leak now. Thanks to all.