Offering my beautiful, left handed, walnut TX200 Mk3.
Purchased new by me, then I found out that I disliked the violent firing cycle. So, I bought a couple different springs from Jim at Air Rifle Headquarters. Still no good. Well, then I sent the barreled action across country to Steve H (NitroCrushr here) who installed the 22mm skirtless piston kit from Tony Leach. While Steve was installing and tuning the piston/sleeve kit, he also stoned/polished the trigger sear. I opted for a polished trigger blade externally.
Steve returned the finished action to me along with all of the original pieces (spring, piston, guide). Wow! What a transformation. The first spring gun (that wasn’t a 10m match airgun) that I could actually stack the pellets.
The original guts that were returned to me are included in this sale, along with the two JM springs (soft and firm) from ARH. All of these bits as shown are included in the sale.
I like spares for my airguns, so I purchased an additional synthetic piston seal/o-ring, delrin piston bearings and two additional fitted delrin/oring breech seals. Enough spares to last for a VERY long time.
Tony’s kit along with Steve’s installation & tuning completely transformed this spring gun. Cocking motion is soft, silent and silky smooth. Of course there is no buzz from the spring. It’s’ pellet is the JSB 8.44 Diabolos !
Other included extras are a Rowan Engineering, machined black/aluminum cocking lever grip, a spare yoke that attaches the barrel to the fore stock, and a spare Air Arms rubber bumper.
Hawke Sidewinder FFP 4-16x50SF scope with MIL illuminated reticle (17410) and SportsMatch one piece adjustable mount can be included, or not.
No flaws that I can discern on this TX. It’s mint.
$925 shipped-airgun only w/spares (minus scope and mount) including careful packaging (stock and action separated)
$1275 shipped-airgun with scope and mount
Purchased new by me, then I found out that I disliked the violent firing cycle. So, I bought a couple different springs from Jim at Air Rifle Headquarters. Still no good. Well, then I sent the barreled action across country to Steve H (NitroCrushr here) who installed the 22mm skirtless piston kit from Tony Leach. While Steve was installing and tuning the piston/sleeve kit, he also stoned/polished the trigger sear. I opted for a polished trigger blade externally.
Steve returned the finished action to me along with all of the original pieces (spring, piston, guide). Wow! What a transformation. The first spring gun (that wasn’t a 10m match airgun) that I could actually stack the pellets.
The original guts that were returned to me are included in this sale, along with the two JM springs (soft and firm) from ARH. All of these bits as shown are included in the sale.
I like spares for my airguns, so I purchased an additional synthetic piston seal/o-ring, delrin piston bearings and two additional fitted delrin/oring breech seals. Enough spares to last for a VERY long time.
Tony’s kit along with Steve’s installation & tuning completely transformed this spring gun. Cocking motion is soft, silent and silky smooth. Of course there is no buzz from the spring. It’s’ pellet is the JSB 8.44 Diabolos !
Other included extras are a Rowan Engineering, machined black/aluminum cocking lever grip, a spare yoke that attaches the barrel to the fore stock, and a spare Air Arms rubber bumper.
Hawke Sidewinder FFP 4-16x50SF scope with MIL illuminated reticle (17410) and SportsMatch one piece adjustable mount can be included, or not.
No flaws that I can discern on this TX. It’s mint.
$925 shipped-airgun only w/spares (minus scope and mount) including careful packaging (stock and action separated)
$1275 shipped-airgun with scope and mount