Does anyone know how it compares with the RTI Prophet? I just ordered the Prophet performance model.
Upvote 0
AGT Uragan
- Thread starter xsivone
- Start date
If it has a weak link in the scope rail I haven't found it. And I've shot many thousands of slugs at over 100 fpe in .251 thru it. Most accurate, day to day, no poi changing AG I've ever had. Period!
and the Power and Trigger are highly adjustable. My trigger pull gage which starts at 8 oz's cannot even begin to read it.
Knife
Upvote 0
Both .22 and .25 are equally accurate.
Wind affects more .22 Cal than .25 and the best to deal with wind is the .30 Cal.
I have the Uragan .22 and just love it. I also have the Vulcan 2 in .25 and .30.
The big advantage of the Uragan is the shot count and also is shorter and lighter.
Both Vulcan 2 and Uragan require a Riser Mount like this one:
You must have a really long neck! LOL!!!! I had to put low mounts om mine, and I'm a pretty big fellow. GRRRRRR!!!
Knife
Upvote 0
had a compact 22 cal was a blast very accurate had a 25 al full size wasnt that happy with it. getting a 22 cal full size tomorrow so looking forward to it
I hate to hear it Douger. My .25 is unreal in accuracy. But I do only shoot slugs. I've never really shot pellets thru it. ;<)
.25 slugs have a better BC in this size gun that .22 or .30.
Upvote 0
No poi changes when you need dead nut's accurate. It might be worth while to mention that Derrick (ZX10WALL), is the factory authorized repair center here in the U.S. and is a great guy and easy to talk to.
Knife
Upvote 0
Here's mine and what it shoots.
Knife
one shot and adjust scope for wind. 5 at 80 yards on target. 47.4 gr slugs at slightly over 100 fpe. .251 dia.
96 yards on this range
Scope is Zeiss, cocking handle is CF Twill fitted over stainless tubbing, bipod Accu-Tac G-2.
Knife
Knife
Scope is Zeiss, cocking handle is CF Twill fitted over stainless tubbing, bipod Accu-Tac G-2.
Knife
Upvote 0
So why should I install a huma regulator in my Uragan if its (presumably) already regulated? Whats better about the huma over stock configuration?
Upvote 0
You must've really bounced back after having to sell all your airguns not too long ago. I remember Joe Rhea telling us your story and then he disappeared from the forum. Seems like you've owned a new top tier airgun every few weeks since. Congratulations on winning the lottery, you must be the luckiest man on earth.
Upvote 0
Marco, they are my hand cast. I design-modify and test slugs. A LOT of slugs and shoot normally 200 to 500 slugs on most days. ;<)
Mike
Upvote 0
The Huma although not more powerful as sent from the factory, it has a much larger plenum. with the addition of a simple 22 thou. shim in the stack, it is whole other fire breathing animal. It went form 47 fpe factory tune to well over 100 fpe capable. I have it set to 96 fpe currently and it gets 20+ shots on this setting.
It's a monster on tough Texas Vermin. If I need more, out comes the 200 fpe Talon/Dor .257. LOL
But I enjoy the Uragan and its rapid follow up so much I'm thinking of selling the Talon/Dor and Raptor both.
Knife
Upvote 0
Douger, I must have missed a lot in the last couple of months. Been busy with 1911's.
Thanks Heavy! I much appreciate the compliment. Today, more testing with the Cothran valve in the Raptor. Woo-Hoo!!!
Mike
Thanks Heavy! I much appreciate the compliment. Today, more testing with the Cothran valve in the Raptor. Woo-Hoo!!!
Mike
Upvote 0
Marco, here are a few different types I cast for myself. Solid, Hp, and frangible. Molds are by NOE and Arsenal that I mod myself to obtain the performance I want, or to make them HP molds.
Mike/Knife
HP's for the Raptor in .223 and .218
This batch will last 3 to 4 days in testing.
.2167 for the PP-700 pcp pistol. My night time black light equipped Scorpion hunting set up.
Modded mold for the .223 Raptor, turning solids into HP's
.251's for the Uragan. 47.2 gr
OOP's wrong pic. these are .223
View attachment DSC02497.1634464197.JPGConsistent? 60 at 80 yards with Raptor in .223
Vermin hp for the PP-700 pcp air pistol. when shot from pcp rifle, they segment with explosive results and decrease the chances of down range issues. 
Light weight hunting round in .25 for the Uragan. Now they are 34 gr at .251
5 in one hold .223
Current .251 hunting slug. 
This is how they preform. they open in a flower pedal style for max expansion. Well over .50.
I Marco, I'll stop boring you now. LOL There are lols more. The 84 gr HP's for the Talon/Dor are really impressive performers.
Mike
Mike/Knife
I Marco, I'll stop boring you now. LOL There are lols more. The 84 gr HP's for the Talon/Dor are really impressive performers.
Mike
Upvote 0
The Reese cups is so he can reward himself! I’ll buy him a bag of Reese cups for a 22cal hp mold! My dad has my grandfather’s fishing weight/decoy anchor stuff. The old lead melter holds 110-120 lbs and will melt it in about 15-20 min. We use to produce a lot of weights. It would be nice to repurpose it to do slugs
Upvote 0
What, 100 fpe!! Thats a significant jump.
as for your slugs, im thinking of turning a swaging die for my .30 cal. I can imagine its a lot of trial and error, but any suggestions or tips to get me started on the right path?
Upvote 0
M
Marco25
Guest
Knife. Definitely the work true craftsman Thanks for your pictures they are very impressive it’s great to see the custom work people on the forum
produce.
Marco
produce.
Marco
Upvote 0
So my Uragan has a thread protector on the end of the barrel, but then there are 6 spacers behind that, what are these for? It seems strange there is no detailed info on this rifle. Even the fill hose included with the rifle is not mentioned in the owners manual, what gives?
Upvote 0