I just purchased a 30 Uragan and wanted to know if anyone added a bipod rail extension to add extra stability? If so, which ones you added and if you would recommend them.
Thanks
Thanks
AGT Uragan picatinny rail extension for bipods
- Thread starter TRUST475
- Start date
I tried, bought one off Amazon. And it was too flimsy as many reviewers stated so I returned it. I have not found a suitable one yet.
I did email AGT and they indicated they were coming out with one. Not sure if it will be sold as an accessory or on new guns only.
I did email AGT and they indicated they were coming out with one. Not sure if it will be sold as an accessory or on new guns only.
Upvote 0
I installed a UTG picatinny riser onto mine. Adds roughly 20cm to the rail and is rock solid with no wobble or play at all. Made a big difference to stability. 
You can see it here when it was on my impact (with another short riser to clear the bottle- not needed on the uragan).
You can see it here when it was on my impact (with another short riser to clear the bottle- not needed on the uragan).
Upvote 0
Thanks for the input. I have seen other pics of the forum members with Uragan bipod rail extensions added. I might try a few different rails and see what works.
I might even try to reach out to John Hagan as he made me several adapters for various guns.
I might even try to reach out to John Hagan as he made me several adapters for various guns.
Upvote 0
I found one by tufforce that is 11” long. About $30 us. But the company does not have very good reviews.
Upvote 0
Air guns of Arizona have them in stock.. one for the standard uragan n one for the uragan king..
Upvote 0