If I can help with any questions folks, please do let me know. Thanks, Steve
Enjoy!
https://youtu.be/Dzs_muWHE5s
Enjoy!
https://youtu.be/Dzs_muWHE5s
Hi Steve,
Outstanding job. I noticed that the barrel was flexing quite a bit while you were talking as you rested your left arm across the barrel. Did you notice any change in POI with the Crown Continuum?
I also had a heck of a time finding rings high enough for the magazine to clear my scope. What height are the rings you are using?
Really enjoyed the video Steve. Did anyone else notice the chunk missing from the rear o-ring at 55:54 of the video?
The real downside to the Continuum IMO is that if you go with a 380mm in .22 and have a 600mm or 700mm .30 cal barrel for it as well in the case, you have effectively done yourself out of needing any other airgun EVER!
Totally unacceptable IMO LOL! a man can never have too many guns, or too much alcohol and tobacco!
The real downside to the Continuum IMO is that if you go with a 380mm in .22 and have a 600mm or 700mm .30 cal barrel for it as well in the case, you have effectively done yourself out of needing any other airgun EVER!
Totally unacceptable IMO LOL! a man can never have too many guns, or too much alcohol and tobacco!
Crazy thing is.. I can't wait to go fiddle with the tuning some more. Highly addictive, lol
Yes and personally I never touch the rear screw as it is primarily there to seal the hole after drilling the transfer port, I have 5 Crowns and have not needed to remove that screw on any, although I have heard of an instance where very rare manufacturing tolerances at either end have required it to be slacked off due to the brass part being too tight in its factory position.