AEA AEA SF Standard leak .25

[(F)Airgunner]

I think you cracked the poppet valve pin.

I haven't cracked anything. That's weird part.

 

[zerochance]

I have an AEA SF Compact in .25. Great plinker due to the semi auto. So far no issues. A bit heavy to carry with you if you hunt. However, since I use most my air guns to hunt, I may be selling my AEA SF Compact shortly here.

 

[dreadnought.tactics]

I changed that o-ring and it didnt got better at all.... Its leaking on opposite side of fill probe when I try to fill it. does anyone have any suggestions what is wrong with it. SF Standard in .25cal.

Can you post a video

 

[(F)Airgunner]

Can you post a video

actually, that sf was on duty today! I got it working.

 

[Phelps]

Just wanted to post an update, BINTAC has some top tier customer service. Set me up a video call with a technician, diagnosed it immediately and told me the specs of the part. Turns out it's a tiny one way valve, the Oring on the inside had been worn down. They sent out a replacement o ring, but im impatient and ordered one next day. The exact size is 2.6mm*1.2mm

View attachment 410635

View attachment 410636

View attachment 410637

View attachment 410638

Hi ! I own a AEA! Was wondering where did you order your o rings from? Ebay the only place I was able to find that exact size and there coming out of China, 3-4 weeks on shipping! Help !

 

[(F)Airgunner]

Hi ! I own a AEA! Was wondering where did you order your o rings from? Ebay the only place I was able to find that exact size and there coming out of China, 3-4 weeks on shipping! Help !

I just bought from local hardware Shop. Outside dianeter is little bit bigger than original, backseat it's little bit too thick.
It works nicely, but adds little bit resistance.

 

[jareyes872]

Anyone have any idea what's going on here? It is leaking air from the fill probe. And if I remove the probe it leaks from the hole where the probe goes in. It also does not hold pressure and cannot be filled at all. I have completely disassembled the tank and check all o-rings and made sure all threads were unmarred.

I was having the same problem and I put a few drops of silicone lubricant (5 or 6) in the hose of the compressor then filled the airgun, the regulator has a tiny check valve that dries out and gets stuck in the open position when filling. It worked for me. Good luck