This was my pesting work horse for about 2 years. We've been on quite the journey together, but I'd like to make room for other projects.
$500 shipped to CONUS
AEA HP Max .35 cal
3.6L Alsafe CF tank (July 2022 mfg date)
AEA M18x1.5mm bottle adapter
M18x1.5mm 2400 PSI output regulator
DonnyFL M18x1.0 Moderator Adapter
Impulse Air 1350 .35 cal Moderator with extra blue baffle
Blue castle nut, blue minimalist stock, blue fill nipple cover
1x magazine
500 FX .35 cal 81 gr pellets
50ish JSB Hades 77.16 gr pellets
Fill probe (not needed since you fill through the regulator)
Shroud cap (not needed due to the moderator adapter)
The gauges are not the most accurate. AEA gauge on the gun reads 2000 psi though the output pressure is 2400. This is common with the AEA gauges. The regulator Gauge reads high. If you do 3600 psi fills, it'll show 4000psi.
This gun chronographs at around 555 FPS with about 52 FPE. I think it's backyard quiet for a 1/4 acre suburban lot, but not if the neighbors are in their respective backyards.
The gun is insanely consistent with the regulator. At 3600 psi fills (4500 psi max), it can go through two mags (16 shots) easy before I feel compelled to top it back off.
$500 shipped to CONUS
AEA HP Max .35 cal
3.6L Alsafe CF tank (July 2022 mfg date)
AEA M18x1.5mm bottle adapter
M18x1.5mm 2400 PSI output regulator
DonnyFL M18x1.0 Moderator Adapter
Impulse Air 1350 .35 cal Moderator with extra blue baffle
Blue castle nut, blue minimalist stock, blue fill nipple cover
1x magazine
500 FX .35 cal 81 gr pellets
50ish JSB Hades 77.16 gr pellets
Fill probe (not needed since you fill through the regulator)
Shroud cap (not needed due to the moderator adapter)
The gauges are not the most accurate. AEA gauge on the gun reads 2000 psi though the output pressure is 2400. This is common with the AEA gauges. The regulator Gauge reads high. If you do 3600 psi fills, it'll show 4000psi.
This gun chronographs at around 555 FPS with about 52 FPE. I think it's backyard quiet for a 1/4 acre suburban lot, but not if the neighbors are in their respective backyards.
The gun is insanely consistent with the regulator. At 3600 psi fills (4500 psi max), it can go through two mags (16 shots) easy before I feel compelled to top it back off.
