Do any here have any info on reducing trigger pull on AEA Challenger . I can,t seem to find any info on doing that.
Fly
Fly
AEA ,challenger trigger job
- Thread starter Fly
- Start date
I'll be checking on that tonight, I am gassing the gun up and will try my first shot in 5 hours from now!
Upvote 0
Did you see they released a moderator for standard Challengers? Should be on sale as an upgrade soon. That would probably go well with a trigger job.
Upvote 0
Yes Bin... idk about everyone else but I love this guy. Always comes through and great informal customer service.
Upvote 0
Hello Fly, I did the work on both my 22 and 357 Challenger triggers.
It is quite easy as far as triggers go.
I removed the trigger assembly.
Removed the pins.
Polished the three trigger touching/matting surfaces to a mirror finish.
Removed about 50% of the Sear (be careful not to remove too much)
Reassembly and tested.
I repeated this a few times until I got the 22 trigger at a very Crisp 1 lb and the 357 I stopped at about 2 lbs. Still Crisp as a potato chip but a bit more umph for safety on this big banger.
I don’t have a good video of this trigger work but do have a video on a barrel/receiver o-ring fix I did on my 22 Challenger.
Prospector TrippUpvote 0
Hello Fly, made a video on the AEA Challenger trigger work. Hope this helps.
Prospector Tripp Upvote 0