What diameter slugs do they like the best? I am going to buy a lee mold to cast slugs for mine.
It depends on the model and maybe even revision. Some like 356, some like 357. Make sure you know which magazine you have, some are short and maximum is around the Lee 102 grain, some are longer and will take up to around 3/4 inch long ammo. I know people with both. The Lee 356-102-1R and 356-95-RF should both work in the short magazine. Both of these will probably drop .3565 with pure lead unless you heat the lead to around 750-800 degrees, then you might get .357. Either way you should have sizing equipment to squeeze them down to desired size. You'll want to lube or powder coat to keep some of the lead out of the barrel. You'll need to research lube, I don't have a recommendation yet, trying something new to me and not sure it is what we need. Powder coat works well and not too hard to get going.
Upvote 0