In this video I am reviewing the 4 in 1 Target system. Check it out below.
https://youtu.be/OyG1lSho-vc
https://youtu.be/OyG1lSho-vc
ABC Targets’ 4 in 1 Bell system video review
- Thread starter intenseaty22
- Start date
cute those pellets dropping off that bell from the HW30
G’day Christian, Just some thoughts. What if the bell was instead of being square it was semi triangular on all sides and upside down. This would imo reflect the pellets down and if there was a tray at the bottom would catch the pellets. No mess.
Anyway great vid mate, stay safe.
Gary
Anyway great vid mate, stay safe.
Gary
Upvote 0
Thanks for checking it out guys.
@oldspook Cute indeed, but definitely very well suited for the bell target. It had a much more pleasing sound from the lower powered gun. Chipmunks around here don't really think it's very cute though. I wear them out with that gun, just sniped one a few mins ago at 29 yards.
@windmill Thanks for the feedback. Hopefully @abctargets sees the comments and may could consider all the feedback.
@oldspook Cute indeed, but definitely very well suited for the bell target. It had a much more pleasing sound from the lower powered gun. Chipmunks around here don't really think it's very cute though. I wear them out with that gun, just sniped one a few mins ago at 29 yards.
@windmill Thanks for the feedback. Hopefully @abctargets sees the comments and may could consider all the feedback.
Upvote 0
I have two of them...really well made. Just cannot get one of the bells to “ring” yet..have any suggestions? Thank you in advance.
Upvote 0
If you see in my video, the "afterthought" I shoot at the "bell" by itself. I wanted to see if there was any discernible difference in tone. I would do that first. Shoot the bell by itself and see if it rings nicely for you. If it does, then I would put the system together, but make sure that the bell part is hanging low enough. I noticed that the tone would get affected if it hits the sides or if it hit the screw on top while swinging from the impact. If the "bell" does not ring all by itself, I guess I would reach out to @abctargets and ask. What gun are you shooting at it? How much FPE is it? I noticed that the lower powered gun gives off a nicer sounding bell sound than the violent hit from the high powered gun. Hope some of that helps.
Upvote 0
Thank you! Will try just the bell. Shooting my .22 Raptor tunes for 36fpe with 18gr. Just a loud ting close in sound to my all in one target trap.
Upvote 0
@ranchibi Have you tried shooting it with a less powerful gun? My Cricket was shooting around 32fpe and the sound from it wasn’t as crisp as the Springer. It’s almost like the very harsh slap from the lead shocks the ring out of it. Either that or it makes the bell hit the sides or top and that stops it from ringing. Hard to say for sure, but maybe you can rule out some causes.
Upvote 0
Have not shot it with my P-rod yet but that was my thinking...Raptor shooting too hot for the ring, thank you! Will contact them and see if they think this is why the louder sound! I appreciate all your input kind sir! Very nice targets either way and I got the buy one get one free from them.
Upvote 0