G
G
Guest
Guest
Adjustable it looks like. Nice. I don’t have an FX, but it looks nice. I am one of those 1% on this board that don’t have it. Nice gun though deserves a nice pad, and thanks for the post
Upvote 0
I think I got one of the first ones! SN1002
A lot better than the oem pad. The cant adjustment is also a really cool feature. You don't see many pads with that, usually just cast if anything.
Also those pips add quite a bit of grip!
A lot better than the oem pad. The cant adjustment is also a really cool feature. You don't see many pads with that, usually just cast if anything.
Also those pips add quite a bit of grip!
Upvote 0
I've ordered mine, should ship tomorrow, it's bound to make the gun more user friendly, nice simple design, no bar and parts to catch on.
Upvote 0
I found this one on eBay and I’m very surprised as to how well it’s made, very robust construction. Not only does it moves up and down on the rifle the usual way but the claws themselves move up or down.
Upvote 0
Boo, 3D printed parts don't belong on high-end rifles. 3D printed parts are cool for prototyping, not practical usage. This isn't a second hand opinion, I have a 3d printer I use all the time. There is a time and place, but my Impact isn't one of them...
Upvote 0
I just ordered one for my SK-19. I'm psyched that someone made a good upgrade for the (very poorly designed) OEM SK-19 butt pad.
I'm still a little concerned about the mounting screws being so close together and both being located near the top of the stock. That configuration causes a lot of shear stress on the screws, which are pretty small. Mine keep coming loose as a result.
I'm still a little concerned about the mounting screws being so close together and both being located near the top of the stock. That configuration causes a lot of shear stress on the screws, which are pretty small. Mine keep coming loose as a result.
Upvote 0
@kirkb
There are 3 holes on the plate. So you can drop it down one set of holes an inch or so.
I'd probably choose which position works best for you and then blue loctite the screws.
There are 3 holes on the plate. So you can drop it down one set of holes an inch or so.
I'd probably choose which position works best for you and then blue loctite the screws.
Upvote 0
Just so there's no misunderstanding, my critique was of the way LCS decided to mount the original butt plate, not of Kraford & Lypt's upgraded butt stock. Kraford & Lypt have no control over that.
Upvote 0