700mm .177FX barrel kitt

[Deleted member 33063]

i just received one of the first 700mm .177 on the planet ...first impressions my gun now needs a detuning.no mods installed and no settings changed just a swap.first shot string is with the 500mm.all shots with jsb 10.34.the 700 kit now does not include a moderator(hence the 2 shots) but comes with a thread protector

 

[Lewis]

Can't wait to hear the results. I've been hoping for this.

 

[8thman]

Interested to see how slugs perform.

 

[Deleted member 33063]

Interested to see how slugs perform.

i have a few 10.03 Knockouts an a handfull o 12,5 NSA i will give them a try later on and let you know

 

[Deleted member 33063]

it is very promising but i am very low on Ammo for tuning so i am sorrry guys. shots are at 70 meters

 

[8thman]

Not bad! Looks like they are promising. Thanks for sharing 

 

[Deleted member 33063]

Not bad! Looks like they are promising. Thanks for sharing

and the liner is not even properly leaded. i would say the 15gr NSA at around 920 fps will be the perfect choise..the 12,5s do not cycle properly in the magazine and had to be single loaded..Also when they become available make sure you get the carbon sleeve as well

 

[qball]

Wait a minute, where did you get that? Also what’s the twist rate? 

 

[Deleted member 33063]

Wait a minute, where did you get that? Also what’s the twist rate?

i am not sure what the twist rate is but on the pack it says 'fast' i would really like @fx usa to jumb in and let us know ..

 

[qball]

Wait a minute, where did you get that? Also what’s the twist rate?

i am not sure what the twist rate is but on the pack it says 'fast' i would really like @fx usa to jumb in and let us know ..

where did you get it? Inquiring mind must know!!! 


BTW you can measure the twist rate from outside!!! Please measure it for us, I’m dying to know! 

 

[Deleted member 33063]

Wait a minute, where did you get that? Also what’s the twist rate?

i am not sure what the twist rate is but on the pack it says 'fast' i would really like @fx usa to jumb in and let us know ..

where did you get it? Inquiring mind must know!!! 


BTW you can measure the twist rate from outside!!! Please measure it for us, I’m dying to know!

no need to measure anymore its 1;18

 

[qball]

Thanks! Darn it, I was hoping they came out with a faster twist rate. Guess the wait continues. 

 

[Mg616]

+ 1 for intel on where to get it. Saw them on Huma site, need to get them across the pond. 

+1 for TR 1:16 and CF sleeve. Please.

 

[Deleted member 33063]

Huma air now has them in stock but i dont know if you can order in the USA