65.6g Slug vs Duct Seal... Trying again

Damn,
65.5 grain slug at 990 FPS / 142 FPE
Still didn't get through the cat food can stuffed with duct seal.
I bet without the hollow point it might just get through
IMG_20250628_060446943.jpgIMG_20250628_060527648_MF_PORTRAIT.jpgIMG_20250628_060553333_MF_PORTRAIT.jpgIMG_20250628_060559037_MF_PORTRAIT.jpg
 
Last edited:
  • Like
Reactions: ZekeZX10
This test makes me feel a lot better about shooting into my duct seal trap with my .30, thanks!
I still wouldn't trust it for more than a couple shots with the 30 cal, here I tried it with some 54g slugs, in the video it looked pretty cool. https://www.airgunnation.com/threads/54g-slug-vs-duct-seal.1333159/

I used it in the backyard with my notos, good for quite a few shots, when it gets too chewed up I just push the putty around and smooth it out again then good to go for another dozen or so shots
 
I still wouldn't trust it for more than a couple shots with the 30 cal, here I tried it with some 54g slugs, in the video it looked pretty cool. https://www.airgunnation.com/threads/54g-slug-vs-duct-seal.1333159/

I used it in the backyard with my notos, good for quite a few shots, when it gets too chewed up I just push the putty around and smooth it out again then good to go for another dozen or so shots
I use a Square-D circuit breaker box, which is fairly thick, with 20lbs of duct seal in it. I have been using it for years and now it has probably doubled in weight and it looks like a lead mass, mostly. I would be more impressed than mad, if an airgun of mine shot through it.

[ just weighed it, 34.9lbs, lighter than I thought]