So I bought one of these https://www.amazon.com/TUXING-4500p...00psi+carbon+fiber+air+tank,tools,1871&sr=1-2 How do you know how much pressure is in the tank? The gauge only works when filling something. There is a burst disk on the back and im woundering if I could replace that with a small gauge so I could monitor whats left in the tank? Thanks for the help
6.8 L Tank pressure?
- Thread starter Boogie
- Start date
You can use a “deadhead” block in the foster fitting to read your pressure, then bleed and remove. I can send a pic in an hour or so…
Upvote 0
Yeah a deadhead like this is what you want. Minimal air is lost using the line to check it.
DO NOT remove the burst disk. That is there for safety in the case of overpressure.
DO NOT remove the burst disk. That is there for safety in the case of overpressure.
Upvote 0
Looking at the picture of the hose (on Amazon) it looks like one end is a standard QD and the other is 1/8 BSPP? In order for that Dead-Head to work you would need a QD fitting on both ends of your hose? Seems you still need some custom setup to do what you want.
Upvote 0
I ordered one and it works but when the tank gets low it will not fill my gun all the way so I can tell when I need to fill it up
Upvote 0
