Tuning 3D Printed Monocore or Improved Baffles for Marauder

[bretben55]

Has anyone came up with a design and 3D printed it to improve the Marauder even more or better than the stock baffles?

 

[Healthservices]

I think member hajimoto has done so much with these and has done some baffle printing as well.



https://www.airgunnation.com/members/hajimoto/



wait... maybe it was the gauntlet 

 

[KatoKevin454]

if you have a 3D printer you can modify this to fit

View attachment Flash Baffle ver.7.1624304540.1628640363.stl

 

[Motorhead]

Want less noise in your M-rod .. or ANY PCP for that mater INSTALL A HAMMER DE-BOUNCER DEVISE.

SSG, TSS, Free flight hammer or Cobra valve guts etc ... It definitely works better !!!!!

 

[dan_house]

I got much better results from the stock shroud by opening up the holes in the gizmo that lets air go back into the shroud.

 

[libertybellcdr]

Hello, I wanted to re-open this to see if anyone has printed the monocore baffle. Any success? Noticeable difference? thoughts?

 

[bearbar]

Has anyone tried the 1 piece baffle pictured above

 

[KatoKevin454]

Has anyone tried the 1 piece baffle pictured above

I use the one above in many of my guns, I designed it originally for a Hatsan QE gun, but modified it to work in some of my home made Moderators, have one on my Prod and it is whisper quiet, built one for a Sam Yang 909 .44 cal, it made it as loud as a Sheridan with 5 pumps, I do wrap the core with felt to help reduce sound even more, the Baffle is Proven and will work better than the Original as long as you size it correctly and wrap it with felt.

you can find them on Tinkercad in the Users Gallery