Seneca/Sam Yang 357 Recluse My Take

I've had this rifle for a bit over a month
I purchased it used with a Donny FL can on it.
I'm a bullet caster of many years and a .35 caliber rifle fan so this gun made sense to me.
After trying the lighter pistol type bullets I've found the gun to prefer 200-225g semi pointed rifle type bullets with shorter body and longer nose.
The best design so far is the SAECO #351 plainbase mold.The nose diameter is such that when pushing it in the breech is tends to center nicely. Others of similar shape with smaller noses do not shoot quite as well but still better than the short pistol types.
The gun is shooting about 210 fpe on high power for 6 or 7 good shots and roughly 130 fpe in low power for about 15 good shots.
Accuracy is "usually " 3-4 MOA for 5 at 100 yards . The better 5 shot groups at 50 yards are into 1" quite often.At 25 yards its just a ragged hole.
I found I was getting a slight bit of lead in the bore and accuracy suffered. I now coat my bullets and let them dry with carnauba wax(planet waves wood instrument polish) and accuracy is now reliable.
I'm happy with the rifle and having an Omega compressor and making bullets from reclaimed lead as well as recovering my bullets makes it as close to free to shoot as possible.

These groups are today at 60 yards(in a bit of wind) and are average with the 200g.

Holy cow these guns have hideous trigger pulls!!

20241002_103332.jpg
 
Last edited:
@harrympope Is the trigger gritty feeling or is the pull just heavy? Or is it the way that the trigger breaks that you don't like? Have you measured the trigger pull weight?
All of the above gritty,inconsistent release and heavy. I think I would break my trigger pull gauge testing it.... ok It's 7.5-8#
It's sort of like two rusty files rubbing together... it's very difficult to figure out when it's going to break so follow through is very critical.
I have a fairly decent size collection of antique military rifles so I'm used to a pretty c***** triggers.
 
  • Wow
Reactions: Ezana4CE
The trigger unit slides right out, which is a nice feature in the Korean guns.

Remove the receiver screws and take it off the action.

At the back of the action there should be a small Phillips screw that you unscrew. Then the unit will slide out. You should be able to tell the contact points to lightly polish.
Thanks maybe I'll tear into it this weekend. Right now i'm struggling making an extractor for an antique rifle. I need to finish that one first before I screw something else up....
 
Sorry I may have misspoke, I was thinking it was like the Career, Savers and Sumatras. I checked on my Shin Sung Fire, which is the predecessor to your Recluse. If it's like my Fire I used a 7/8 flatbar to unscrew the stock thru the buttpad from the action and then you can get access to the the receiver and remove the trigger unit. I took photos of on my old phone, I'll have a look this weekend and post pics.