34 mm mid quality picatiny rings

[wyshadow]

Can someone point me in the right direction? My budget is under 200 and needs to be 1.5 inches above the scope rail (XX high). I need rings to be made out of aluminum and not steel because I'm sure most of my pcp rails are aluminum. I've been told you should always stay with the same metal and not use steel rings if mounting to aluminum. I don't really want the one piece mounts because I've found they can be limited for eye relief. Two piece mounts are just more versatile.

 

[DShepard]

I have Eaglevision IPS-34 rings. $79 from Utah Airguns. 

 

[DARKHORSE1967]

UTG PRO rings are very good rings and made in the USA--I happen to own 2 pairs of them.

1 side, the removable clamp, is made of steel though.

Another option is Burris XTR Sig rings, as they do not mar your scope:



https://www.amazon.com/Burris-34mm-Height-Matte-420211/dp/B00U1AUVQW/ref=sr_1_8?dchild=1&keywords=xtr+burris&qid=1589839012&s=sporting-goods&sr=1-8

 

[JB426]

I think one piece mounts might be overlooked sometimes. Of course you can’t use them in some cases but when possible they will often be better and can be as adjustable as needed. 
I know you said you’d rather go two piece but maybe check out aeroprecisionusa.com. Their one piece is awesome and very light. They have 34mm. 


Other than that check out the two piece UTG Pro(made in USA), the Eagle Vision, Burris XTR(very nice) and Vortex Pro.

All of these are way less than $200. 

 

[Yo]

The BURRIS won't put a Mark on your scope. Yo!

 

[wyshadow]

DShepard,

Good call on the rings. I never knew Eaglevision made 34 mm rings. I think I'll buy those rings.

 

[mercado]

I read some were here that fx was going to sell 34mm adjustable scope rings .. for the new 34 mm element scopes n they were supposed to be available from this month...I'm still waiting..or maybe I miss read something.

 

[Jayson]

I have Eaglevision IPS-34 rings. $79 from Utah Airguns.

+1 on the Eaglevision, they are definitely a step above the no limits rings!

 

[Houli]

I like these "Warne Mountain Tech" made from 7075 T6 aluminum. check out the specs below. MSRP is $149.99 but can find cheaper price. Ebay has new set, as buy now, for $107.99.



https://warnescopemounts.com/product/7224m-34mm-msr-ideal-height-rings/#tab-description

Be sure to click on the specs, will bring up a sizing chart.

Cheers

 

[DARKHORSE1967]

Personally, I find those acorn-looking nuts abominable.

I would not even put those on a centerfire, let alone on an airgun.

I am very conscious when it comes to scope rings even its screws.

A screw may be an insignificant part to some but I give them beauty.

Mine do not have ugly "splines" or markings.

I also polish them and deburr the bottom.

I like my screws, even set screws, look like a work of art 

 

[DanielL]

I am very conscious when it comes to scope rings even its screws.

A screw may be an insignificant part to some but I give them beauty.

Mine do not have ugly "splines" or markings.

The "ugly markings" are the strength/rating call out. Without them you don't know what you are getting.

 

[JungleShooter]

If you're spending the money, you might as well get adjustable rings....



In adjustables for 34mm I've seen the following (all 2-piece and picatinny, unless otherwise noted):

▪Burris XTR Signature: select from 3 different heights: uses a full set of shims, very solid)

▪Burris AR-Signature QD P.E.P.R. mount (quick detach, one-piece)

▪Eagle Vision: models IPS-34 and INS-34

▪Sportsmatch: one model for elevation adjustment, the other for both elevation and windage: also available in dovetail



Happy shopping!

Matthias

 

[tsp3355]

I own all of the rings/mounts in JungleShooter's reply. They are all good. Kind of depends on personal preference and application. I also really like the ARC (American Rifle Company) rings which I use on my custom PRS rifle but they are not adjustable. For adjustable, I prefer the Sportsmatch and the Eagle Vision. I use the Sportsmatch on more traditional rifles (RAW and Crown) and the Eagle Vision on my Impact.

 

[wyshadow]

The rings came in today and they look awesome. They came in this fancy case and I did feel a little bad about taking the rings out and using them. Almost like they should be sitting behind a glass case

 

[jerrymail]

Does anyone use another adjustable 2-piece rings, model INS-30 or INS-34? How about those?

 

[Macros]

I have the Eagle vision INS -34. They're awesome. Very very similar to the IPS variants just without the picatinny bits on the top and with the ring tightened at an angle. I like the fact that they look a lot cleaner and slicker, but if you're planning to mount additional torches etc then the IPS might be more suitable



I also have a few of the sportsmatch adjustables including the fully adjustable 30mm ATP66 and the height adjustable ATP34, and one set of FX. All work just fine. I'd give the edge to the sportsmatch overall purely from a precision of adjustment perspective due to the little grub screw they use. Other than that it's mostly personal preference, or rather whatever you can get cheapest for your particular setup, as they're all well machined and solid. 

 

[jerrymail]

Thank you for share experiences.

Yes, I do prefer the cleaner design from INS-30/34. Also noticed the INS has less adjustable height than IPS, but still same as FX.

 

[AirSupply]

I’ve got the sportsmatch 34mm adjustable rings. I like them but they didn’t have quite enough adjustment for me to optically centre my scope. Otherwise great rings.