300s adapter for picatinny QD bipod.

[AirSupply]

I would like to eventually buy a quality rest but in the short term is there an adapter I can fit to the rail that would allow me to use my QD picatinny bipod? Thanks Michael 

 

[bubblerboy64]

1. I don’t know of anything but if you could grind the head of a bolt down so that it would fit into the metal channel running under the forearm you could then fasten a small piece of wood to which you could attach a picatiinny mount. That would work. Me if just get a Caldwell bag and use that. 
2. https://www.google.com/aclk?sa=l&ai=DChcSEwio-uySz7_iAhUOi8gKHfU5BZIYABATGgJxdQ&ae=1&sig=AOD64_3kCD1A5LqIWv-RxCayrK0HVC2rog&ctype=5&q=&ved=2ahUKEwiq8eaSz7_iAhXRVN8KHYhMD5kQwg96BAgJEBc&adurl=https://rover.ebay.com/rover/1/711-117182-37290-0/2%3Fmpre%3Dhttps://www.ebay.com/p/1653870095%3Fthm%3D1000%26chn%3Dps%26mkevt%3D1%26mkrid%3D711-117182-37290-0%26mkcid%3D2%26itemid%3D1653870095_1000%26targetid%3D740524795146%26device%3Dm%26adtype%3Dpla%26googleloc%3D9006703%26poi%3D%26campaignid%3D1908126893%26adgroupid%3D70192125963%26rlsatarget%3Dpla-740524795146%26abcId%3D1140976%26merchantid%3D6296724%26gclid%3DEAIaIQobChMIqPrsks-_4gIVDovICh31OQWSEAQYBSABEgJwX_D_BwE
   [/LIST=1]

 

[MScottLeeman]

If it's the Anshultz (typo?) rail, a swivel stud can be attached so a bipod can be mounted. Available at Pyramyd Air. I have one on my Diana 75...

I also have one of these little stands I found on ebay. It was under 20 bucks.

Beautiful Rifle,btw!!

Hope this helps,

Mike

 

[Guest]

Everything MScottLeeman says is correct and is exactly what I use.

hope this helps

Mitch

 

[marflow]

so all European target rifle rail are Anschutz and the American rail are freeland

http://www.championshooters.com/index.php?option=com_virtuemart&view=productdetails&virtuemart_product_id=486&virtuemart_category_id=74&Itemid=111

that being said the bipods shown above are really meant to be used as a stand in the field, so you don have to lay your rifle on it side on say the ground, I have one and they are small

so and Anschutz to weaver-picatinny rail, it is a bit pricey but this is what people use for there Atlas bipods

https://www.amazon.com/Rail-Anschutz-Picatinny-Bipod-Adapter/dp/B00G33O05Y

now if you are handy and have the right tools you can make your own by using a flat bottom weaver mount and a piece of 1/2 x 1/8 aluminum stock

you must remove 1/16 inch off both sides and it is a perfect fit for a Anschutz rail drill and screw the weaver rail to the adapter you made and you have your mount for your bipod

I used a router with a milling bit for my cut but a table saw would work with a plywood blade

so that is about all I have for mounting a bipod to a weaver-picatinny mount and to a Anschutz accessory rail

I hope it helps and yes they are the same on the D75

this is cheaper but still to much

https://www.midwayusa.com/product/1014964944/atlas-bipod-afar-accuracy-international-freeland-anschutz-rail-kit-steel-black

 

[Metalmaniac]

Go to Rapid Air Weapons web site they have a Euro rail to Pic rail adapter that bolts on gun and your done for $35.00 kind of expensive but it is an option. Double check for fit on Euro rail side. Hope this helps. MM

 

[AirSupply]

Thank you for the reply’s. All good advise that I appreciate. Feel confident that I could make the adapter up as you have suggested marflow. I have a flat based length of picatinny so I’ll give it a go.

I agree the Accuracy International adapter is to expensive for what it is. 

Thanks for the pictures of your Diana 75 Scott

 

[Michigander]

I used to make my own tee nuts for rail accessories until I found these Rectangular Tee Nuts at ACE Hardware. They fit perfectly although you will have to either grind or file the thread boss so it doesn't protrude above the rail, or drill a recess for the boss in the rail accessory. I always drill the recess in order to assure good thread engagement. This shows the fit to the rail of a 300S. They also fit the Anschutz rail.

Chuck

 

[AirSupply]

Chuck. Thanks for that